Gardena 46 V 4044 Panduan Petunjuk Pengoperasian - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin Pemotong Rumput Gardena 46 V 4044. Gardena 46 V 4044 12 halaman. Petrol lawnmower
Halaman Cetak
5. Operation
Adjust the handle inclination:
The handle can be set to any body size by setting the angle of
inclination.
1. Undo both wing nuts
8
the handle
2. Set the required handle
inclination.
3. Tighten both wing nuts
6
Setting the cut height:
The cut height can be set centrally in six stages.
46 V / 46 VD:
46 VDA / 51 VDA:
z
1. Pull the handle
released.
2
2. Set the required cut height by rotating the handle
The cut height set will be shown in mm on the cut height
1
i
display
u
3. When the cut height has been selected engage the handle
in the appropriate locking position again.
Mowing with mulch unit:
v Only lift the protective flap
and the blade bar has stopped.
o
Inserting mulch unit:
p
1. Lift protective flap
ejection chute until it stops.
2. Fit the retaining spring
bottom of the housing.
This stops the mulch unit
Removing the mulch unit:
a
v Lift the protective flap
the housing and remove the mulch unit
20
DANGER!
Danger of physical injury from the blade bar!
v Before making any adjustments wait for the
blade bar to stop, put on suitable working
gloves and remove the spark plug connector.
8
until
6
can be inclined.
6
8
8
.
30 / 40 / 50 / 60 / 70 / 80 mm
25 / 35 / 45 / 65 / 75 / 95 mm
z
towards the wheel
u
until the lock is
z
.
i
on the mower.
DANGER!
Foreign bodies thrown out of the mower can cause
injuries!
o
when the engine is turned off
o
and push the mulch unit
p
into the
a
to the top of the mulch unit
p
falling out.
o
, unhook the retaining spring
p
.
o
Mowing with the
collection bag:
s
o
Starting the mower:
z
p
and the
a
from
Do not grasp the ejection chute with your hand.
If the protective flap
o
is released it will close automatically and
cover the ejection chute.
o
The protective flap
is designed in such a way that mowing
can take place even if the protective flap is closed without the
mulch unit or Collecting Bag. The cuttings are then left on the
lawn.
DANGER!
Foreign bodies thrown out of the mower can cause
injuries!
v Only lift the protective flap
o
when the engine is turned off
and the blade bar has stopped.
The mulch unit must be removed before mowing with the
collection bag (see Mowing with mulch unit).
The collecting bag must be emptied as soon as grass cuttings
are left on the lawn while mowing.
1. Lift the protective flap
o
and remove the grass collection
s
bag
from the handle.
s
2. Empty the grass collection bag
, lift up the protective flap
and replace the grass collection bag
s
at the back of the
housing.
DANGER !
Danger of physical injury if the mower does not
switch off automatically!
v The security devices fitted to the mower (safety swich,
drive lever) must not be removed or bypassed.
ATTENTION!
Damage to the engine!
The engine must be filled with oil before starting.
v See 7. Maintenance for instructions on filling the engine
with oil.
The drive handle / lever must not be removed from the
handle when starting.
o
21