Avaya 9500 Catatan Aplikasi - Halaman 6

Jelajahi secara online atau unduh pdf Catatan Aplikasi untuk Telepon IP Avaya 9500. Avaya 9500 8 halaman. For nctc
Juga untuk Avaya 9500: Catatan Aplikasi (11 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna (4 halaman), Referensi Cepat (2 halaman), Referensi Cepat (2 halaman)

6. Configure Jabra LINK 14201-20 EHS Adapter

During the compliance test, the Jabra LINK 14201-20 headset adapter was used for the

connection of the Jabra PRO 920 headsets to the Avaya 1400/9400/9500 series digital

telephones.

6.1. Settings

Connect the Avaya digital phone to the digital panel of the Communication Manager system.

Follow the wizard guide to set the PRO 920 headset base unit EHS mode to DHSG and set

"Clear dial tone switch" in "A" position, for more information please refer to headset manual.

6.2. Connection of cables

Connect the cable marked red (already included and attached into the AUX port of the adapter)

to the AUX socket on headset base unit.

Connect the cable marked purple included with the 14201-20 adapter to the ring tone detector

socket in the Jabra Link and place the ring sensor on the area of ringer sound (speaker) on the

desk phone.

Connect the cable included with headset system, with one end to the phone socket in the headset

base unit and the other end to the phone socket on the Jabra Link 14201-20 adapter.

Make sure to select the right cable for Avaya desktop phone, refer to the cable matrix section

included with Jabra LINK adapter. For the Avaya 1400/9400/9500 series digital phone, the cable

marked as "A" has been selected to connect the headset socket on the Jabra Link 14201-20

adapter and the headset socket on the desk phone.

7. Verification Steps

 Pick up and put the PRO 920 wireless headset on. The light of the headset button on the

digital desk phone should now be ON, the audio link indicator on headset base unit

should also be ON, and the dial tone should be heard on the wireless headset.

 From the digital phone with adapter and headset, dial an extension of another Avaya

digital phone and answer the call on that phone.

 Check audio path on the wireless headset and the handset of the other phone is

established.

 End the call above by pressing the Multifunction button on the wireless headset. The

LED of the headset button on the Avaya digital desk phone should be OFF and the audio

link indicator on headset base unit is OFF.

KP; Reviewed:

SPOC 1/13/2012

Solution & Interoperability Test Lab Application Notes

6 of 8

Link14201-20Dig