Gardena PowerMax 1100/32 Panduan Operator - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Operator untuk Mesin Pemotong Rumput Gardena PowerMax 1100/32. Gardena PowerMax 1100/32 10 halaman. Electric lawnmower
Juga untuk Gardena PowerMax 1100/32: Panduan Operator (10 halaman), Panduan Operator (10 halaman), Panduan Operator (15 halaman)
Halaman Cetak
4. Stop the product when the grass box
5. Lift the protective flap
(22)
.
6. Remove the grass box
(9)
of the product by the handle
7. Empty the grass box.
Tips to use the mower:
If grass residue is left in the discharge opening, pull the mower backwards
about 1 m so that the grass residue can drop out downwards.
To produce a well-maintained lawn, we recommend to cut the lawn
regularly once a week if possible. The lawn becomes thicker if you cut it
frequently.
After relatively long cutting intervals (holiday lawn), first of all cut in one
direction with the highest cutting height and then cut in the crosswise
direction with the required cutting height.
If possible, only cut the grass when it is dry, if the grass is damp, the cut-
ting pattern will be uneven.
4. MAINTENANCE
DANGER! Risk of injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from the
mains and use gloves before you do maintenance.
To clean the product:
DANGER! Electric shock!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with a water jet
(in particular highpressure water jet).
To clean the underside of the product [ Fig. M1 ]:
The underside is easiest to clean after you mowed.
Use gloves.
1. Lay the product on its side carefully.
2. Clean the underside, the blade and the airflow slots
(do not use sharp objects).
To clean the overside of the product and the grass box:
Do not clean with chemicals including petrol or solvents.
1. Clean the overside with a damp cloth.
2. Clean the airflow slots and the grass box with a soft brush
(do not use sharp objects).
5. STORAGE
To put into storage:
The product must be stored away from children.
1. Disconnect the product from the mains.
2. Clean the product (see 4. MAINTENANCE).
3. To save space, release the wing nuts of the handles until the
joints can be folded together easily.
4. Stow the product in a dry, enclosed and secure place.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal household waste.
It must be disposed of in line with local environmental regulations.
IMPORTANT!
v Dispose of the product through or via your municipal recycling
collection centre.
6. TROUBLESHOOTING
DANGER! Risk of injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, disconnect the product from the
mains and use gloves before you do troubleshooting.
10
(9)
is completely filled.
(11)
.
(23)
with a brush
To replace the blade:
DANGER! Electric shock!
Cut injury when the blade turns and it is damaged, bent,
out of balance or has chipped edges.
v Do not use the product when the blade is damaged, bent, out
of balance or has chipped edges.
v Do not regrind the blade.
The GARDENA spare parts are availible from your GARDENA dealer or
from the GARDENA service.
Only use an original GARDENA blade:
• GARDENA replacement blade Art. 4102.
1. Let the blade replace by the GARDENA Service or a specialist dealer
authorised by GARDENA .
Problem
Possible Cause
Engine does not start
Extension cable is disconnected
or damaged.
Blade is blocked.
Engine is jammed and
Blade is blocked.
makes a noise
Cutting height is too low.
Loud noises, the mower
Screws on engine, its fixing
is rattling
or on the mower housing are
loose.
Mower runs unevenly or
Blade is damaged or the blade
vibrates strongly
mounting is released.
Blade is very dirty.
Lawn is not cleanly cut
Blade is blunt or damaged.
Cutting height is too low.
NOTE: For any other malfunctions please contact the GARDENA service
department. Repairs must only be done by GARDENA service departments
or specialist dealers approved by GARDENA.
7. TECHNICAL DATA
Electric Lawnmower
Unit
Value (Art. 5031)
Rated Power
W
1100
Mains voltage
V
230
Mains frequency
Hz
50
Speed of rotation cutting
R/min.
3400
blade
Cutting width
cm
32
Cutting height adjustment
cm
2, 4 and 6
(3 positions)
Volume of grass box
l
30
Weight
kg
7.5
Sound pressure level L
85
1)
dB (A)
PA
Uncertainty k
3
PA
Sound power level L
:
2)
WA
measured/guaranteed
95 / 96
dB (A)
Uncertainty k
0.4
WA
Hand/arm vibration a
4.5
1)
m/s
2
vhw
Uncertainty k
1.5
a
Measuring process complying with:
EN 60335-2-77;
1)
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of
exposure. The vibration emission value can vary during actual use of the elec-
tric power tool.
8. ACCESSORIES
GARDENA replacement
As replacement for blunt blade.
blade
Remedy
v Connect the extension cable
or if necessary replace it.
v Remove the obstacle.
v Remove the obstacle.
v Raise the cutting height.
v Have screws tightened by an
authorised specialist dealer
or the GARDENA Service.
v Have blade tightened or
replaced by an authorised
specialist dealer or the
GARDENA Service.
v Clean the mower (see
4. MAINTENANCE). If this
does not rectify the problem,
contact the GARDENA
Service.
v Have blade replaced by the
GARDENA Service.
v Raise the cutting height.
RL 2000/14/EC
2)
Art. 4102