Gardena SILENO+ R160Li Panduan Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Cepat untuk Mesin Pemotong Rumput Gardena SILENO+ R160Li. Gardena SILENO+ R160Li 4 halaman.
5. Starting and stopping
See chapter 4.4 and 4.5 in the Operator's Manual
Starting
1. Open the cover by pressing the STOP button.
2. Set the main switch to position 1. When you do this for the first time, a start up sequence starts
where you select a four digit PIN code among other things.
3. Press the START button.
4. Close the cover.
Stopping
Press the STOP button.
6. Adjust the robotic lawnmower to suit
your garden
See chapter 6.3, 6.5, 6.7 and 6.8 in the Operator's Manual
Here you will find some tips on important settings for your robotic lawnmower.
All settings for your robotic lawnmower are made via the menu functions.
Adjust the mower to suit the size of your lawn
The mowing results depend on mowing time. Adjust the mowing time to suit your
garden using the Timer function. If the mower cuts too often, the lawn will appear
trampled down. If the mower cuts too seldom, the lawn will not be properly mown.
Test run the mower through narrow passages
Narrow passages in the garden make it difficult for the mower to find the charging station. Use the Test function to
test that the mower can travel through the narrowest passage.
1. Place the mower in the charging station.
2. Select Test in the robotic lawnmower's menu (Lawn coverage > Area X > More > Test) and press OK. Then
press the Start button and close the cover.
3. Check that the mower follows the guide wire through the passage.
a.
If the mower travels through the passage, the test is complete.
b.
If the robotic lawnmower does not get through the passage: Check that the guide wire has been laid ac-
cording to the instructions in chapter 3.6 in the Operator's Manual.
It is also possible to adjust the corridor width for the guide wire. See chapter 6.7 in the Operator's Manual.
The right to make changes without prior notice is reserved.
Copyright © 2016 GARDENA Manufacturing GmbH. All rights reserved.
www.gardena.com
115 84 40-26
Timer
You decide what times during the day and days of the week the mower is to work.
When setting the timer, calculate that the robotic lawnmower mows about the
listed amount of the number of square meters per hour and day listed in table Work
capacity.
Table Work capacity
Model
GARDENA R100Li / R100LiC
GARDENA R130Li / R130LiC
GARDENA R160Li / R160LiC
WWW.GARDENA.COM
3
About m
per hour and day
2
59
68
70
3
1