Gardena SILENO+ R160LiC Panduan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Mesin Pemotong Rumput Gardena SILENO+ R160LiC. Gardena SILENO+ R160LiC 4 halaman.

GETTING STARTED WITH

THE GARDENA ROBOTIC LAWNMOWER

1. Placement of and connecting the charging

station

See chapter 3.2 in the Operator's Manual

1. Place the charging station at a central position in the work area, with a lot of open

space in front of the charging station and on a relatively horizontal surface.

2. Connect the power supply's low voltage cable to the charging station and the power

supply.

3. Connect the power supply to a 100-240 V wall socket.

2. Charging the battery and

placement of the boundary wire

See chapter 3.3 and 3.4 in the Operator's Manual

1. Place the robotic lawnmower in the charging station to charge

the battery while the boundary wire is laid. Set the main

switch to position 1.

2. Run the boundary wire ensuring it forms a loop around the

work area.

3. Make an eyelet at the point where the guide wire will be

connected later (see point 3.4).

1. Main switch

2. STOP button

3. LED for function check of the

boundary and guide wires

4. Display

5. Keypad

10 cm / 4"

30 cm / 12

0 cm / 0"

10 cm / 4"

35 cm / 14"

Charging station