Lexmark Color Laser Panduan Administrator - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Administrator untuk Printer Lexmark Color Laser. Lexmark Color Laser 20 halaman. Finisher setup guide
Juga untuk Lexmark Color Laser: Manual Koneksi (5 halaman), Membersihkan Kemacetan Secara Manual (2 halaman), Membersihkan Kemacetan Secara Manual (2 halaman), Panduan Konektivitas (6 halaman), Pengaturan (2 halaman), Panduan Administrator (12 halaman), Manual Koneksi (7 halaman), Catatan Rilis (4 halaman), Setup Manual (2 halaman)

Halaman Cetak
Lexmark Color Laser Panduan Administrator
Notes:
•
The installed solution descriptor appears in the Plug-ins/Solutions on Server box. The solution descriptor details
appear in the Details box.
•
If the descriptor file is not valid, MVP 11.2 will display an error message.
7
Click Close.

Accessing application configuration settings using MarkVision Professional

Note: MarkVision Professional 11.2 or later required.
To configure a solution in MVP:
1
From the MarkVision Professional Home screen, select Embedded Solutions - Solutions Management from the All
Tasks list.
2
Select devices using the Quick Find or Folders tabs.
Use Ctrl + click and Shift + click to select multiple devices.
Note: When a device managed by MVP is not supported by a specific task, its name will appear with a black line
through it in the Quick Find or Folders tabs. Password-protected network devices are displayed in red. Enter the
device password to gain access to the device.
All installed embedded solutions appear.
3
Select the solution to be configured.
4
Click Fetch Descriptor(s) to install the necessary solution descriptor onto the MVP server from the device.
5
Click Configure, and then adjust settings as needed.

Licensing the application

An electronic license is required for the application to run on the printer.
If individual licenses are used, then you must install them locally on each printer. If you plan to use the application with
several printers, then you may prefer to install the Lexmark License Server and obtain a network license for the
appropriate number of devices.
For more information on purchasing a license for the application, contact your Lexmark representative.

Obtaining a license file

For local (individual) licensing
1
From the Embedded Web Server, click Settings or Configuration.
2
Click Device Solutions > Solutions (eSF), or click Embedded Solutions.
3
Click System.
Configuring the application
8