Gardena 6000 1777 Manual Petunjuk Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Manual Petunjuk Pengoperasian untuk Pompa Air Gardena 6000 1777. Gardena 6000 1777 14 halaman. Submersible pump/dirty water pump
Halaman Cetak
Manual operation:
3
5
4
5. Storage
To put into storage:
Disposal:
(in accordance with
RL 2012/19/EU)
6. Cleaning
Flushing the pump:
Cleaning the suction base
and feed impeller:
The warranty does not
become void as a result of
this maintenance work
14
To ensure that the pump can draw in water, the level must be above
the minimum water level at start-up (see 8. Technical Data).
The pump remains constantly in operation because it is switched on
manually by raising the float switch.
1. Stand the pump on a firm surface
– or –
use a rope attached through the bore hole in the carrying
4
handle
to immerse the pump in a well or shaft.
2. Plug the power cable
3. Fix float switch
3
vertically above the pump (with the cable
at the bottom).
As long as the float switch is positioned vertically above the
pump, the pump will operate regardless of the water level.
The minimum residual water depth (see 8. Technical Data) is only
achieved in manual mode because the float switch already switches
off the pump before this when in automatic mode.
v Clean and store the pump in a frost-free place before the first frost
arrives.
The product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your municipal
recycling collection centre.
The GARDENA should not require regular maintenance.
After pumping pumped chlorinated swimming pool water or other
liquids leaving residues, the pump should be rinsed with clear water.
WARNING! Electric shock!
Risk of injury due to electric shock.
v Disconnect the pump from the mains before
cleaning the suction base and feed impeller.
5
into a mains socket.