Avaya J159 Panduan Referensi Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Telepon IP Avaya J159. Avaya J159 5 halaman. In an open sip environment
Juga untuk Avaya J159: Referensi Cepat (6 halaman), Panduan Cepat (6 halaman), Panduan Referensi Cepat (4 halaman), Referensi Cepat (7 halaman)

Halaman Cetak
Avaya J159 Panduan Referensi Cepat
Icon
Description
The Limit Number of Concurrent
Calls (LNCC) feature is on.
Indicates that the SLA Mon
has taken control of the phone.
Indicates that the call is being
recorded for SLA Mon
Indicates that the audio of this call
is secure.
Indicates that the audio alert for
incoming calls is off.
Indicates that you have missed a
call. The number in the icon
indicates the number of missed
calls.
Indicates that you have missed a
call. The + in the icon indicates that
the number of missed calls are
more than 9.
Autodialing feature
Wi-Fi icons
The following table lists the Wi-Fi icons used in the
Avaya J159 IP Phone:
Icon
Description
Non-secure Wi-Fi
network is detected.
Secure Wi-Fi network is
detected.
Wi-Fi network is out of
range or offline.
Operations
Entering the file server address
Enter the file server address if the phone prompts, for
example, when you connect to the network for the first
time.
Obtain the file server address from the system
administrator.
1. When you boot the phone for the first time, the Auto
Provisioning screen displays Do you want to
activate Auto Provisioning now? , press one
of the following:
• Yes: To connect to the Device Enrollment Services
(DES) server to obtain the file server address and
™
agent
ignore the file server address from the DHCP.
• No: To obtain the file server address from the
DHCP server.
™
.
In case of a time out, and the DHCP does not provide
the file server address, the phone selects Yes.
If the connection to DES is successful, and the phone
receives the file server address, the phone continues
to boot and not prompt you for the file server address.
If the connection to DES is successful, and the phone
does not receive the file server address, the phone
prompts you for an Enrollment code. Contact your
administrator for an Enrollment code. When you enter
the valid Enrollment code, the phone continues to
boot and not prompt you for the file server address.
If you do not have an Enrollment code, press Cancel.
The phone continues to boot using the DHCP.
If the connection is successful, the phone displays the
Starting message. If the phone does not receive
the file server address from the DES or the DHCP
server, the phone displays the Enter the file server
address screen.
2. On Enter the file server address screen, press one of
the following:
• Config: To enter the file server address.
• Never: To never prompt for the file server address.
• Cancel: To cancel the prompt and display the Login
screen.
3. After you have pressed Config, enter the file server
address in the Address field.
The address can be in the form of a numerical IP
address or an alphanumeric Fully Qualified Domain
Name (FQDN) like http://myfileserver.com/j100/.
Tip:
To enter the dot symbol (.) in the field, press the
alphanumeric soft key to toggle to the
alphanumeric mode.
To enter the forward slash symbol (/) in the field,
press the / soft key.
4. Press Save.
The phone continues to boot and connect to the file
server address for provisioning configuration.
Making a call by using speed dial
Ensure you have speed dial numbers assigned to your
contacts.
Press and hold the dial pad key assigned to the
number you want to call.
Making an emergency call
Ensure that the Emerg soft key is assigned by your
administrator.
Do one of the following:
• On the Phone screen, press the Emerg soft key,
and again press Emerg when the phone prompts
you for confirmation.
• Dial the emergency number by using the dial pad.
Answering a call when on another call
You can receive a call on a secondary call appearance
only if the call appearance is free.
Press one of the following:
• The Answer soft key
• OK
The phone puts the first call on hold and moves to the
second call.
Adding a person to an active call
You can add participants to an active call to set up a
conference call.
Start a call.
1. During a call, on the Phone screen, press
Conference button or press More > Conf.
The phone puts the existing call on hold.
2. To make a call to a participant, do one of the following:
• Dial the phone extension by using the dial pad.
• Call the person from the Contacts list or the
Recents list.
• Redial the last dialed number by using the Redial
button.
• Highlight the extension on the phone screen, and
press Conference button.
3. When the third participant answers the call, press the
Join soft key or press Conference button.
Viewing the Recents details
In the Recents screen, depending upon the call type, you
can view the following details of each call:
• Incoming call icon
2