Corvette C5-HF Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori Mobil Corvette C5-HF. Corvette C5-HF 8 halaman.

7. Consider install location for push button/microphone. Push button

must be within reach and facing driver for voice commands and phone

dialog (cable is 6ft. long). We recommend completing the rest of the

install prior to securing push button/mic to dashboard. When

ready to install simply remove tape backing and secure to surface

Fig. 7

Custom installed next to traction button

Ensure no ventilation duct is pointed towards the mic.

It is best to mount button facing driver

USB port installation

An updated "SMART" USB charging port has been added to module which charges

based on device current demands and used for charging only.

drives etc.)

Flush to dash/panel requires drilling a ¾" hole in the dash

Flush with Support bracket

wherever your installation demands without drilling)

Flush to Dash or Panel

Drill a ¾" hole in the dash or panel using a step drill bit or equivalent

(See Fig. 10)

Step drill bit

2. Insert the 3ft. USB cable male terminal (See Fig. 11) through the ¾"

hole created in step 1 and plug into USB port on Module (See Fig. 11)

Flush mount 3 ft. USB cable

(Not for thumb

(use this option to mount USB terminal

(drilling required)

Fig. 10

Fig. 11