Gardena 8885 Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemangkas Gardena 8885. Gardena 8885 15 halaman. Accu shears
Juga untuk Gardena 8885: Panduan Petunjuk Pengoperasian (9 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Petunjuk Pengoperasian (16 halaman), Panduan Petunjuk Pengoperasian (16 halaman), Panduan Petunjuk Pengoperasian (10 halaman), Panduan Petunjuk Pengoperasian (17 halaman), Panduan Petunjuk Pengoperasian (16 halaman)

Halaman Cetak

Gardena 8885 Panduan Petunjuk Pengoperasian

Change Shears Set of

Blades:

5. Storage

To put into storage/

overwintering:

Disposal:

(in accordance with

RL2012/19/EC)

Cutting with the Telescopic Swivel Handle:

1. Attach the Telescopic Swivel Handle.

2. Loosen the adjusting bolt

3. Set the handle to the correct length and tighten the adjusting

bolt

4. Disengage the starting lockout

press the ON button

5. Release the starting lockout

Please only use original GARDENA Accu Shears Cutting

Blades.

• Grass+BoxwoodBlade Set cutting width 8 cm

• ShrubBlade Set

• Shrub Blade Set

1. Press both lock buttons

blade set

2. If necessary clean transmission chamber and lubricate gear

wheels with some acid-free grease (Vaseline).

3. Place the shear blade set

the groove

audibly engaged.

4. If necessary, spray the shear blades with Cleaning Spray

Art. 2366. This increases the running time.

When first switching on after changing the blade set, there can be

an audible click when the cam engages with the the shear blade

connecting link.

The product must be stored away from children.

1. Charge battery. This increases the life of the battery.

2. Clean Accu Shears and shear blade with GARDENA Cleaning

Spray Art. 2366 (see 6. Maintenance).

3. Slide blade protection onto the shear blade.

4. Store Shears in a cool, dry place where they are protected from

frost.

The product must not be disposed of to normal household waste.

It must be disposed of in line with local environmental regulations.

v Important! Dispose of the product through or via your municipal

recycling collection centre.

again.

cutting length 12.5 cm Art. 2342

cutting length 18 cm

at the same time, flip up shear

and remove.

with the snap-in lug

and snap shut until both lock buttons

by pushing it forwards and

Art. 2340

Art. 2343

into

have