Gardena 8886 Panduan Petunjuk Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemangkas Gardena 8886. Gardena 8886 15 halaman. Accu shears
Juga untuk Gardena 8886: Panduan Petunjuk Pengoperasian (9 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Petunjuk Pengoperasian (16 halaman), Panduan Petunjuk Pengoperasian (16 halaman), Panduan Petunjuk Pengoperasian (10 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Petunjuk Pengoperasian (17 halaman), Panduan Petunjuk Pengoperasian (16 halaman), Panduan Petunjuk Pengoperasian (16 halaman)

Gardena 8886 Panduan Petunjuk Pengoperasian
A non-functioning battery must be disposed of cor-
rectly. It may not be sent via post. For further details,
please contact your local disposal companies.
The battery charger should be checked regularly
for signs of damage or ageing (brittleness) and may
only be used if it is in perfect condition.
The charger unit provided may only be used to
charge the rechargeable batteries supplied with
the Accu Shears.
Non-rechargeable batteries must not be charged
with this battery charger (danger of fire).
The Accu Shears must not be operated during
charging.

3. Assembly

Fitting / Removing the Wheels:
2
1

4. Initial Operation

Charging the Accu:
4
4
Wheels are only included with the Grass Shears
(Art. 8890 / Art. 8893).
1
(They may be ordered separately from GARDENA Service).
Fitting the Wheels:
v F rom below, press the wheels
two pins
2
Removing the Wheels:
v F rom the underside of the grass shears, push both wheels
together
1
The battery should be fully charged before using for the first time.
Charging time, see 10. Technical Data.
The lithium-ion battery can be re-charged in any state of charge,
and the charging process can be interrupted at any time without
damaging the battery (no memory effect).
The Accu Shears cannot be started during charging.
WARNING!
Incorrect mains voltage damages batteries and the
battery charger.
3
v E nsure the correct mains voltage.
1. Connect charging cable
2. Connect battery charger to an electrical socket.
During charging, the jack
When the jack
Check the charge status regularly while charging.
3. First pull the charging cable
3
unplug the battery charger from the electrical socket.
When there is a sharp fall in the power of the Accu Shears, the
battery needs to be charged. Do not wait until the blade comes
to an absolute stop.
If the jack lights up red or yellow during charging then there is an
error (see 8. Trouble-Shooting).
After charging, disconnect the charger from the
mains and from the battery.
Only charge battery between 10 – 45 °C.
After heavy duty service allow battery to cool
down first.
Storage
The Accu Shears must not be stored over 35 °C
or under direct exposure to sunlight.
Do not store the Accu Shears in places with static
electricity.
into the grass shears until the
1
click into place.
and pull them off.
to the jack
3
flashes green. The battery is charged.
4
lights up green, the battery is fully charged.
4
out of the jack
3
of the Accu Shears.
4
and then
4
15