Broadata LBC-HDBT Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemancar Broadata LBC-HDBT. Broadata LBC-HDBT 17 halaman. Link bridge hdbaset hdmi transmitter system

Halaman Cetak

8. Link LED: The yellow LED will illuminate when both the input

and output signals are connected.

9. CAT5e/6 Out: Connect to the reciever unit with a Single CAT5e/6

cable for tranmission of all data signals.

2.2 Receiver Front and Rear Panels

HDMI-OUT

ETHERNET

1. HDMI Out: Connect to a HDMI equipped TV/monitor for display

of the HDMI input source signal.

2. LAN: Connect to a PC or Laptop to the Internet or network

connection.

3. RS-232 Out: Connect to the device that is to be controlled (via

D-Sub 9 pin female cable) by RS-232 commands.

4. Power LED: This blue LED will illuminate when the device is

connected to a power supply.

5. DC 24V: Plug the 24 V DC power supply into the unit and connect

the adaptor to an AC outlet. Only one side of power needs to be

connected to activate both transmitter and receiver.

6. IR 2 Blaster: Connect to the supplied IR blaster cable for IR

signal transmission. Place the IR blaster in direct line of sight

of the equipment to be controlled.

Broadata Technical Support, [email protected]

Link Bridge

HDbaseT HDMI Transmission System

Front

RS-232

LBC-HDBT-RX

Rear

PWR

OUT

+24VDC

LBC-HDBT User's Manual

LINK

HDBT