Gardena 9838 Panduan Operator - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemangkas Gardena 9838. Gardena 9838 14 halaman. Battery hedge trimmer
Juga untuk Gardena 9838: Panduan Operator (14 halaman), Panduan Operator (10 halaman), Panduan Operator (10 halaman), Panduan Operator (9 halaman)

Halaman Cetak

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection.

Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and / or battery pack, picking up or carry-

ing the tool.

Carrying power tools with your finger on the switch or

energising power tools that have the switch on invites

accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tools may

result in personal injury.

e) Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and safer

at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off.

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source

and / or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool's operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a hazard-

ous situation.

5) Battery tool use and care

a) Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

b) Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, flush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

6) Service

Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Hedge trimmer safety warnings:

• Keep all parts of the body away from the cutter

blade. Do not remove cut material or hold mate-

rial to be cut when blades are moving. Make sure

the switch is off when clearing jammed material.

A moment of inattention while operating the hedge

trimmer may result in serious personal injury.

• Carry the hedge trimmer by the handle with the

cutter blade stopped. When transporting or stor-

ing the hedge trimmer always fit the cutting device

cover. Proper handling of the hedge trimmer will

reduce possible personal injury from the cutter blades.

• Hold the power tool by insulated gripping sur-

faces only, because the cutter blade may contact

hidden wiring or its own cord. Cutter blades con-

tacting a "live" wire may make exposed metal parts of

the power tool "live" and could give the operator an

electric shock.

• Keep cable away from the cutting area.

During operation the cable may be hidden in shrubs

and can be accidentally cut by the blade.

Additional safety warnings

Battery safety

DANGER! Fire risk!

The battery to be charged must be placed on a non-

flammable, heat resistant and non-conductive sur-

face while charging.