Broadata Link Bridge LBC-PSW52 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Broadata Link Bridge LBC-PSW52. Broadata Link Bridge LBC-PSW52 20 halaman. Presentation scaling switch with 5 inputs and two mirrored outputs

Halaman Cetak

2.2 Rear Panel

2
3
1
PHANTOM
OFF
LINE OUT
SERVIC
E
MIC IN
HDMI
1
HDMI 2
1.
Service: The service slot is for firmware update via USB.
2.
Line out: Connects with amplifier for audio source broadcasting.
3.
MIC IN: Plug microphone in for audio source output. The
phantom microphone is well supported.
4.
Phantom on/off: Arrange the slide switch to "on" for condenser
microphone (5V) or "phantom" for professional 48V phantom
microphone. When slide switch arrange to "off", the audio output
will be mute.
5.
Line In: To output HDMI embedded audio of HDMI 1, 2 and
display port source to DVD players.
6.
PC1 / PC2: To output HDMI embedded audio of PC1 and PC2
source to DVD players.
7.
IR Out: Connect with supplied IR blaster cable to sending IR
single which comes from remote control unit to compatible
Receivers.
8.
IR IN: Connect with supplied IR extender cable to receive the
IR signal from the included IR remote. Ensure that the remote
is within the direct line-of-sight of the IR extender.
9.
RS-232: For sending RS-232 command to compatible
Receivers.
Broadata Technical Support, [email protected]
Link Bridge
7
4
9
5
6
8
ON
LINE IN
PC 1
PC 2
I
R OUT
IR IN
RS232
D
ISPLAY PORT
PC 1
13
LBC-PSW52 User Manual
Presentation Scaling Switch
TM
12
11
10
C 1 2 3 4 5
INPUT CONTROL
COM PORT
CONTROL
DC 24V
PC 2
HDMI OUT
CAT5e/6/7 OUT
15
14
7