Gardena AccuCut 450 Li Panduan Petunjuk Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemangkas Gardena AccuCut 450 Li. Gardena AccuCut 450 Li 15 halaman. Turbotrimmer
Juga untuk Gardena AccuCut 450 Li: Panduan Petunjuk Pengoperasian (10 halaman), Panduan Petunjuk Pengoperasian (14 halaman)
Halaman Cetak
Trimming overhanging
lawn edges :
Starting the trimmer :
O
P
6. Storage
Storage :
AccuCut 450 Li :
1. Setting the plant guard
to parking position (see
"Adjusting the plant guard" ).
2. Set handle angle to position 3
(see "Setting the working
position" ).
M
3. Push slider
upwards,
N
turn handle
through 90°
M
and let slider
lock into
z
place (see arrows
articulated fork and handle
holder).
AccuCut 400 Li :
v Open clamping lever
turn upper part of handle
through 180° and close
I
clamping lever
again.
Switching the trimmer on :
1. Press and hold the safety lock
P
the start button
on the handle.
2. Release the safety lock
Switching the trimmer off :
v Release the start button
The Turbotrimmer must be stored out of the reach of children.
1. Clean Trimmer (see 7. Maintenance).
2. Remove blade from blade carrier for storage
(see 8. Troubleshooting).
3. Charging the battery (see 4. Initial Operation).
4. Store the Trimmer in a dry place protected from frost.
Recommendation :
The trimmer can be hung up by the handle. The cutting head
is not put under any unnecessary strain if the trimmer is stored
hanging up.
L
z
P
on
P
I
,
B
I
O
and then press
O
again.
P
on the handle.
N
M
L
B
17