Gardena EasyCut 400 Panduan Petunjuk Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemangkas Gardena EasyCut 400. Gardena EasyCut 400 10 halaman. Gardena electric hedge trimmer operating instructions
Juga untuk Gardena EasyCut 400: Panduan Petunjuk Pengoperasian (10 halaman), Panduan Petunjuk Pengoperasian (14 halaman), Panduan Petunjuk Pengoperasian (10 halaman), Panduan Petunjuk Pengoperasian (7 halaman), Panduan Petunjuk Pengoperasian (10 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Petunjuk Pengoperasian (Bahasa Prancis) (8 halaman)

6. Maintenance

Cleaning the mower:

Problem

Abnormal Noises

Lawn is not cleanly cut

DANGER!

Cutting mechanism can cause injuries!

v Wear suitable work gloves when undertaking

maintenance.

CAUTION!

Damage to cylinder lawnmower!

v Never clean your cylinder lawnmower with running

water, in particular with water under high pressure.

Always keep the lawnmower clean and remove grass deposits.

Deposits affect the cutting result as well as discharge of grass

clippings. Residual dirt and grass is easily removed immediately

after mowing.

1. Remove grass deposits with a brush and a cloth.

2. Oil the blade cylinder and the lower blade with thin oil

(e. g. sprayed oil).

DANGER!

Cutting mechanism can cause injuries!

v Wear suitable work gloves when rectifying faults.

Possible Cause

Screws / components loose.

Foreign bodies on the blade.

Notch in the blade.

Blades are striking each other

too hard.

Blade adjustment incorrect.

Blade blunt.

Grass too long (e. g. after

a relatively long absence).

Remedy

v Tighten screws.

v Remove foreign bodies.

v Remove notches with

grindstone.

v Adjust cutting mechanism.

v Regrind or replace blade.

v Cut lawn shorter with

a sickle.