Gardena ErgoCut 48-Li Panduan Petunjuk Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemangkas Gardena ErgoCut 48-Li. Gardena ErgoCut 48-Li 14 halaman. Cordless hedge trimmer
Halaman Cetak
4. Operation
Working positions :
Rotate cutting unit
through 90° :
8
Starting the Hedge Trimmer :
0
9
A
C
The hedge trimmer can be operated in 3 working positions.
Side trimming:
Cutting unit in
90° position
For sideways cutting, the cutting unit can be rotated through 90°.
The cutting unit can be turned to the right or left for right-handed
or left-handed users respectively.
1. Remove the battery from the handle (see 3. Initial Operation).
2. Keep button
3. Turn cutting unit
7
button
7
4. Push the battery onto the handle (see 3. Initial Operation).
A safety device prevents the Hedge Trimmer from starting up when
7
the button
DANGER ! Risk of physical injury !
If the Hedge Trimmer does not switch off auto-
A
matically, there is a risk of lacerations.
V Never override the safety devices (e.g. by
Switching the Hedge Trimmer on :
The hedge trimmer is fitted with a two-handed safety device (2 start
buttons) to prevent the unit from being turned on by accident.
1. Push the battery onto the handle (see 3. Initial Operation).
2. Remove the protective cover
3. Hold the guide handle
C
button
B
4. Hold the main handle
start button
Switching the Hedge Trimmer off :
1. Release the two start buttons
D
2. Slide the protective cover
3. Remove the battery from the handle (see 3. Initial Operation).
High trimming :
0° position
7
pressed.
8
in the required direction 90° until the
locks into place.
is pressed or not locked in 0° or 90° position.
strapping down one of the start buttons).
9
A
with one hand and press the start
.
B
with the other hand and press the
D
. The hedge trimmer will start.
C
9
over the cutter blade
Low trimming :
0° position
0
from the cutter blade
D
/
.
0
.
15