Gardena HighCut 48 8880 Panduan Petunjuk Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemangkas Gardena HighCut 48 8880. Gardena HighCut 48 8880 13 halaman. Electric hedge trimmer
Halaman Cetak
6. Maintenance
Cleaning the Hedge Trimmer :
7
6
7. Troubleshooting
7
6
Fault
Hedge trimmer does not start
Hedge is not cleanly cut
Telescopic tube slips despite
clamped clamping lever / s
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.
8. Accessories
GARDENA Maintenance Oil
DANGER ! Risk of physical injury / electric shock !
V Always unplug the mains plug and slide the
A
protective cover
before carrying out maintenance work.
V Do not clean the hedge trimmer under running
water (especially high pressure).
1. Clean the hedge trimmer with a damp cloth.
2. Lubricate the trimmer blade
GARDENA spray-oil Art. 2366). Avoid contact of the oil with
plastic parts and wear gloves.
DANGER ! Electric shock !
V Always unplug the mains plug and slide the
A
protective cover
before troubleshooting.
Possible Cause
Extension cable not plugged
in or is damaged.
When rotating the cutting unit, it
was not engaged at 0° or 90°.
When tilting the swivel head, it
was not engaged between 75°
and -45°.
Blade blunt or damaged.
Nut / s loose on clamping lever / s. v Tighten nut / s on clamping
Extends the life of the blade.
6
over the cutter blade
7
with a low viscosity oil (e.g.
6
over the cutter blade
Remedy
v Plug in the extension cable
or if necessary replace it.
v When rotating the cutting
unit, engage it at 0° or 90°.
v When tilting the swivel head,
engage it between 75° and
-45°.
v Have blade replaced by
GARDENA-Service.
lever / s using a 10 mm
spanner.
Art. 2366
7
7
17