Avaya 3606 Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Avaya 3606. Avaya 3606 16 halaman.
Juga untuk Avaya 3606: Panduan Referensi Cepat (1 halaman), Panduan Pengguna (16 halaman)

Halaman Cetak

The Dual Battery Charger Stand

The Dual Battery Charger Stand is a two-slot desktop charger designed to charge

the Nickel Metal Hydride (NiMH) Battery Packs required to operate wireless

telephones. Full charging is accomplished in approximately two hours.

Only NiMH Battery Packs with a YELLOW label on the handset contact side may

be charged in the Dual Battery Charger Stand. Older Battery Packs with a

GREEN label will not charge. If the indicator light is fast flashing with a Battery

Pack or handset in the slot, check to make sure the Battery Pack has a YELLOW

label.

The Dual Battery Charger should not be used to charge Nickel-Cadmium (NiCd)

Battery Packs.

When you are not using your wireless telephone, keep it turned off and in the

Stand.

Do not place anything in the Dual Battery Charger other than the wireless

telephone. You might damage the contacts. Bent contacts can keep the wireless

telephone from charging.

Using the Dual Battery Charger

Place the Dual Battery Charger on a flat, horizontal surface.

The user must end any call in progress by pressing the END key on the wireless

telephone before placing the handset into the Charger. Place the wireless

telephone in the front compartment facing forward. It may be on or off during

charging. A single spare Battery Pack may be placed in the rear slot. Either slot

can be chosen to take priority. The first Battery Pack placed into either slot is

charged first.

There are two indicator lights, one for each charging slot. A solid light indicates

the Battery Pack in the corresponding slot is charging. A solid dim light indicates

that the slot is waiting to charge while the Battery Pack in the other slot is

charging. The light turns off when the charger is finished charging the Battery

Pack. A fast flash indicates the Battery Pack is not charging and must be

replaced. If the light is off, it indicates that the slot is empty, not charging or the

unit is powered off.

Cleaning the Dual Battery Charger

Clean the Dual Battery Charger by wiping the surface with a clean,

water-dampened cloth or paper towel. A mild detergent solution may be used. Be

sure to wipe away any detergent residue with a plain water-dampened cloth. DO

NOT IMMERSE THE DUAL BATTERY CHARGER IN WATER OR OTHER

LIQUID.

Issue 2 February 2003