Lexmark M1145 Referensi Cepat - Halaman 7

•

Flex the stack of envelopes back and forth to loosen them,

and then fan them. Straighten the edges on a level surface.

Load the paper or specialty media.

Notes:

•

Do not force paper or specialty media into the

multipurpose feeder.

•

Make sure the paper or specialty media is below the

maximum paper fill indicator located on the paper

guides. Overfilling may cause paper jams.

•

Load paper, transparencies, and card stock with the

recommended printable side faceup and the top edge

entering the printer first. For more information on loading

transparencies, see the packaging that the transparencies

came in.

Note: When loading A6‑size paper, make sure the

multipurpose feeder extender rests lightly against the

edge of the paper so that the last few sheets of paper

remain in place.

Loading paper and specialty media

•

Load letterhead faceup with the top edge entering the

printer first. For two‑sided (duplex) printing, load letterhead

facedown with the bottom edge entering the printer first.

•

Load envelopes with the flap on the left side facedown.

Warning—Potential Damage: Never use envelopes with

stamps, clasps, snaps, windows, coated linings, or

self‑stick adhesives. These envelopes may severely

damage the printer.

From the printer control panel, set the paper size and paper

type in the Paper menu to match the paper or specialty media

loaded in the multipurpose feeder.