Gardena 19031 Panduan Operator - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Rumput dan Taman Gardena 19031. Gardena 19031 9 halaman.

Halaman Cetak

The batteries should not be removed while water-

ing (leads to continuous watering).

Setting up

CAUTION!

The Water Control must not be used indoors.

v Only use the Water Control outdoors.

The Water Control may only be set up vertically

with the sleeve nut to the top to prevent water

penetrating into the battery compartment.

2. FUNCTION

Water Control:

Controls / Display:

3. INITIAL OPERATION

To insert batteries:

The Water Control is controlled automatically with the GARDENA

smart system App. Sprinklers, a sprinkler system or a drip head

watering system can be used for watering.

The Water Control carries out watering fully automatically according

to the set program and can therefore also be used during holidays.

Early in the morning or late in the evening, evaporation and therefore

water consumption is lowest.

Connection-LED:

Green flashing: While connecting

Green for 10 sec: Signal strength high

Yellow for 10 sec: Signal strength medium

Red for 10 sec: Signal strength low

(2)

LED Active watering:

Green for 10 sec.

(3)

LED Battery display:

Green for 20 sec: Capacity > 4 weeks

Yellow flashing: Capacity < 4 weeks

Red flashing: Capacity < 2 weeks

Red lightning: battery flat

If the LED lights red, the valve is no longer opened. A valve

opened by the program will also close again if the battery is flat.

The battery display is reset when the batteries are changed.

v Replace batteries (see 3. INSTALLATION "To insert batteries").

(4)

Man. Button:

For switching the water throughput on or off manually.

The batteries are not included in the scope of delivery.

The Water Control must only be operated with 3 x alkalimanganese

(alkaline) batteries type LR6 (AA) (Mignon).

The operating period is approx. 6 months. The operating period can

vary depending on ambient temperature and transmission frequency.

The minimum water output to ensure that the

Water Control functions correctly is 20 – 30 l/h.

For example, at least 10 – 15 x 2-litre Drip Heads

are required to control the Micro-Drip-System.

The max. temperature for the water flow is 40 °C.

v Only use clear fresh water.

The minimum operating pressure is 0.5 bar,

the maximum operating pressure is 12 bar.

Avoid tensile strain.

v Do not pull the hose connected to the

Water Computer.