Makita WR100D Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Listrik Makita WR100D. Makita WR100D 12 halaman. Cordless ratchet wrench

Halaman Cetak

Switch action

CAUTION:

Before installing the battery car-

tridge into the tool, always check to see that the

switch lever actuates properly and returns to the

"OFF" position when released.

To start the tool, simply pull the switch lever. Tool speed

is increased by increasing pressure on the switch lever.

Release the switch lever to stop.

► 1 . Switch lever

To prevent the switch lever from accidentally pulled, the

lock lever is provided.

When the lock lever is in the lock position

lever cannot be actuated.

When the lock lever is in the unlock position

switch lever can be actuated.

► 1 . Lock lever 2. Lock 3. Unlock

CAUTION:

When not operating the tool,

always slide the lock lever to the lock position

Electric brake

This tool is equipped with an electric brake. If the tool

consistently fails to quickly stop after switch lever

release, have tool serviced at a Makita service center.

, the switch

, the

Lighting up the front lamp

CAUTION:

Do not look in the light or see the

source of light directly.

Pull the switch lever to light up the lamp. The lamp

keeps on lighting while the switch lever is being pulled.

The light automatically goes out approximately 10 sec-

onds after the switch lever is released.

► 1 . Switch lever 2. Lamp

NOTICE:

When the tool is overheated, the lamp

flickers. Cool down the tool fully before operating

the tool again.

NOTICE:

Use a dry cloth to wipe the dirt off the lens

of the lamp. Be careful not to scratch the lens of lamp,

or it may lower the illumination.

Reversing lever action

CAUTION:

Always check the direction of

rotation before operation.

CAUTION:

Use the reversing lever only after the

tool comes to a complete stop. Changing the direction

of rotation before the tool stops may damage the tool.

This tool has a reversing lever to change the direction of

rotation. Turn the reversing lever to the A side for clockwise

rotation or to the B side for counterclockwise rotation.

Make sure that the reversing lever is fully turned with

a click.

► 1 . Reversing lever

7 ENGLISH