Lexmark MS410 series Referensi Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Referensi Cepat untuk Printer Lexmark MS410 series. Lexmark MS410 series 13 halaman. Ms410 series monochrome laser printer
Juga untuk Lexmark MS410 series: Catatan Teknis (3 halaman), Lembar Pengaturan (2 halaman), Spesifikasi (2 halaman), Panduan Servis (14 halaman)
•
The factory default paper type for Tray 1 is Plain Paper.
•
The factory default paper type for the multipurpose feeder is
Custom Type 6.
•
The paper type setting must be manually set for all trays.
Configuring Universal paper settings
The Universal paper size is a user‑defined setting that lets you print on
paper sizes that are not preset in the printer menus.
Notes:
•
The largest supported Universal size is 216 x 355.6 mm
(8.5 x 14 inches).
•
The smallest Universal size supported in the multipurpose
feeder is 76 x 127 mm (3 x 5 inches). The smallest Universal size
supported in the optional tray is 183 x 210 mm (7.2 x 8.3 inches).
From the printer control panel, navigate to:
> Paper Menu >
> Universal Setup >
Measure >
> select the unit of measure >
Specify the paper height and width
1
From the printer control panel, navigate to:
> Paper Menu >
> Universal Setup >
Measure >
> select the unit of measure >
2
Press the arrow buttons until Portrait Height or Portrait
Width appears, and then press
.
3
Change the settings, and then press
Loading trays
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all other
trays closed until needed.
1
Pull out the tray completely.
Note: Do not remove trays while a job prints or while Busy
appears on the printer display. Doing so may cause a jam.
2
Squeeze and then slide the width guide tab to the correct position
for the size of the paper you are loading.
> Units of
> Units of
.
2
2
3
Squeeze and then slide the length guide tab to the correct position
for the size of the paper you are loading.
2
Notes:
•
For some paper sizes like letter, legal, and A4, squeeze and
slide the length guide tab backward to accommodate their
length.
•
When loading legal‑size paper, the length guide extends
beyond the base leaving the paper exposed to dust. To
protect the paper from dust, you can purchase a dust cover
separately. For more information, contact customer support.
•
If you are loading A6-size paper in the standard tray, then
squeeze and then slide the length guide tab toward the
center of the tray to the A6‑size position.
•
Make sure the width and length guides are aligned with the
paper size indicators on the bottom of the tray.
1