Gardena ES 500 Panduan Operator - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Rumput dan Taman Gardena ES 500. Gardena ES 500 15 halaman. Electric lawn rake
Juga untuk Gardena ES 500: Panduan Petunjuk Pengoperasian (12 halaman), Panduan Petunjuk Pengoperasian (9 halaman), Panduan Operator (15 halaman), Panduan Operator (15 halaman), Panduan Operator (9 halaman), Panduan Operator (9 halaman)

Halaman Cetak
Gardena ES 500 Panduan Operator
E
F
G
H
L K
Problem
Abnormal noise,
clattering in the unit
Whistling sound
18
1. Unscrew two screws
2. Lift aerator cylinder
shaft 2.
3. Pull bearing shell
4. Unscrew and remove screw
5. Remove cover plate
spring element holder
6. Push new spring elements
element holder
The bores on the cover plate
holder 
L
7. Push in bearing bolt
bolt
, cover plate
I
top of each other.
8. Screw in screw
9. Push aerator cylinder
10. Put bearing shell
11. Screw bearing shell
with the screw
I
J
J
Possible Cause
Foreign bodies on the aerator
cylinder are hitting the Rake.
Foreign bodies blocking the
aerator cylinder.
Cogged belt slipping.
on the underside of the housing.
E
at an angle 1 and pull away the drive
F
off the aerator cylinder
G
and draw out bearing bolt
H
and spring elements
J
.
L
and cover plate
K
.
L
J
must lie on top of each other.
in such a way that all 3 bores (bearing
I
and spring element holder
J
.
H
on to the drive shaft.
F
on the aerator cylinder
G
on to the lower side of the housing
G
without tightening too much.
E
.
F
from the
K
on the spring
J
and the spring element
) are on
L
.
F
Remedy
1. Switch off the rake, remove
the mains plug from the
socket and wait until the
cylinder has stopped
rotating.
2. Remove foreign bodies.
3. Check Rake immediately.
v C ontact GARDENA Service.
.
I