Lexmark MS610 Series Referensi Cepat - Halaman 13

Jelajahi secara online atau unduh pdf Referensi Cepat untuk Printer Lexmark MS610 Series. Lexmark MS610 Series 17 halaman. Machine type 4514-630, 4514-635, 4514-636
Juga untuk Lexmark MS610 Series: Catatan Teknis (3 halaman), Memindahkan Manual (2 halaman), Manual (20 halaman), Manual Koneksi (6 halaman), Manual Pencetakan (5 halaman), Referensi Cepat (18 halaman), Manual Kertas (4 halaman), Manual Informasi (1 halaman), Lembar Pengaturan (2 halaman), Spesifikasi (2 halaman), Panduan Servis (18 halaman)

Halaman Cetak
Lexmark MS610 Series Referensi Cepat
5
Lift the green flap in front of the printer.
6
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
7
Insert the imaging unit by aligning the arrows on the side rails of
the unit with the arrows on the side rails inside the printer, and
then insert the imaging unit into the printer.
8
Insert the toner cartridge by aligning the side rails of the cartridge
with the arrows on the side rails inside the printer, and then insert
the cartridge into the printer.
9
Close the front door.
10
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
13
[x]‑page jam, open rear door. [20y.xx]
1
Open the front door.
2
Gently pull down the rear door.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
to clear the message
.
3
Firmly grasp the jammed paper on each side, and then gently pull
it out.
1
2