Gardena RS 10 2150 Panduan Petunjuk Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Rumput dan Taman Gardena RS 10 2150. Gardena RS 10 2150 11 halaman. Grass shears; grass cutter

Halaman Cetak

Blade assembly RS 10, RL 10

(Fig. F)

Remove the Accu from the

working unit!

Disassembly

Release both screws (F 6) and

remove the complete blade set by

slightly tilting as you remove it.

Assembly

The upper blade must be placed

exactly in the middle of the lower

blade. Turn the cam gear (F 1)

so that the marking line (F 2) is

pointing exactly forwards.

Firstly guide the blade underneath

the blade peg of the sliding sled

(F 3). Make sure that the cam (F 4)

snaps into the connecting link (F 5).

Tighten screws. (F 6).

Blade assembly RL 20 (Fig. F / G)

For the Grass Cutter you

need two sets of Spare Blades,

Art. No. 2346. Please always

replace both sets of blades at

the same time. This avoids pos-

sible imbalance during operation

and prevents damage.

Disassembly

Release the four screws (G 3).

Remove the sled (G 1) and the com-

plete cutting blade set by slightly

tilting it as you remove it.

Assembly

The upper blade must be situated

exactly in the middle of the corre-

sponding lower blade. Turn the cam

gear (F1) so that the marking line

(F2) is pointing exactly forwards.

Firstly guide each blade underneath

the blade peg of the sled (G 2).

Make sure the cam (F 4) snaps into

the connecting link (F 5). Insert the

sled (G1). Make sure that the

guiding groove fits securely over

the two middle blade ends.

Tighten screws (G3).

Please note: Before inserting

new blades, clean the gear area.

Lubricate the gears with some

noncorrosive grease (Vaseline).

Hold the Grass Shears in correct

working position before the

Accu is clicked in and the unit

is switched on again.

The blades should always be sharp

in order to obtain good cutting

results. They can be sharpened

by using a sharpening stone. We

especially recommend immediate

removal of notches and burrs which

could be caused by stones. The

opportunity to separate the upper

and lower blades makes sharpening

especially easy.

With problems, please contact

one of our Service Centres or send

the defective unit together with

a short description of the problem

and, in case of guarantee, with

a copy of the receipt directly to one

of our Service Centres.

We expressly point out that,

in accordance with the product

liability law, we are not liable

for any damage caused by our

units if, in the case of repair

or exchange, original GARDENA

spare parts are not used and

repair is not carried out by a

GARDENA service centre or an

authorised specialist. The same

also applies to spare parts

and accessories.