Lexmark MS610de Referensi Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Referensi Cepat untuk Printer Lexmark MS610de. Lexmark MS610de 18 halaman. Ms610 series monochrome laser printer
Juga untuk Lexmark MS610de: Catatan Teknis (3 halaman), Manual (20 halaman), Menu Map (4 halaman), Manual Pencetakan (4 halaman), Manual Informasi (1 halaman), Lembar Pengaturan (2 halaman), Manual Perlengkapan (2 halaman), Spesifikasi (2 halaman), Referensi Cepat (17 halaman)
Halaman Cetak
Supported flash drives and file types
Flash drive
Many flash drives are tested and approved for use with
the printer. For more information, contact the place
where you purchased the printer.
Notes:
•
High‑speed USB flash drives must support the
fullspeed standard. Low-speed USB devices are
not supported.
•
USB flash drives must support the File Allocation
Table (FAT) system. Devices formatted with New
Technology File System (NTFS) or any other file
system are not supported.
Canceling a print job from the printer control
panel
1
Touch Cancel Jobs on the touch screen, or press
keypad.
2
Touch the job you want to cancel, and then touch Delete Selected
Jobs.
Adjusting toner darkness
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the
address field.
Notes:
•
View the printer IP address on the printer home screen. The
IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to
load the Web page correctly.
2
Click Settings > Print Settings > Quality Menu > Toner Darkness.
3
Adjust the setting, and then click Submit.
Using the printer control panel
1
From the home screen, navigate to:
> Settings > Print Settings > Quality Menu > Toner Darkness
File type
2
Adjust the setting, and then touch
Documents:
•
.pdf
Linking and unlinking trays
•
.xps
Images:
1
Open a Web browser, and then type the printer IP address in the
•
.dcx
address field.
•
.gif
Notes:
•
.jpeg
or .jpg
•
View the printer IP address on the printer home screen. The
•
.bmp
IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
•
.pcx
•
If you are using a proxy server, then temporarily disable it to
•
.tiff or .tif
load the Web page correctly.
•
.png
2
Click Settings > Paper Menu.
•
.fls
3
Change the paper size and type settings for the trays you are linking.
•
To link trays, make sure the paper size and type for the tray
match that of the other tray.
•
To unlink trays, make sure the paper size or type for the tray
does not match that of the other tray.
on the
4
Click Submit.
Note: You can also change the paper size and type settings using the
printer control panel. For more information, see "Setting the paper
size and type" on page 5.
Warning—Potential Damage: Paper loaded in the tray should match
the paper type name assigned in the printer. The temperature of the
fuser varies according to the specified paper type. Printing issues
may occur if settings are not properly configured.
Setting up and using the home screen
applications
Notes:
•
Your home screen may vary depending on your home screen
customization settings, administrative setup, and active
embedded applications. Some applications are supported only in
select printer models.
.
6
•
There may be additional solutions and applications available for
purchase. To learn more, inquire at your point of purchase.
Accessing the Embedded Web Server
The Embedded Web Server is the printer Web page that lets you view
and remotely configure printer settings even when you are not
physically near the printer.
1
Obtain the printer IP address:
•
From the printer control panel home screen
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and
then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
2
Open a Web browser, and then type the printer IP address in the
address field.
3
Press Enter.
Note: If you are using a proxy server, then temporarily disable it
to load the Web page correctly.
Customizing the home screen
1
Open a Web browser, and then type the printer IP address in the
address field.
Note: View the printer IP address on the printer home screen.
The IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
2
Do one or more of the following:
•
Show or hide the icons of basic printer functions.
a
Click Settings > General Settings > Home screen
customization.
b
Select the check boxes to specify which icons appear on the
home screen.
Note: If you clear a check box beside an icon, then the
icon does not appear on the home screen.
c
Click Submit.
•
Customize the icon for an application. For more information,
see "Finding information about the home screen applications"
on page 7 or see the documentation that came with the
application.