Gardena SmallCut 300 Panduan Petunjuk Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Rumput dan Taman Gardena SmallCut 300. Gardena SmallCut 300 8 halaman. Turbotrimmer
Juga untuk Gardena SmallCut 300: Panduan Petunjuk Pengoperasian (12 halaman), Panduan Petunjuk Pengoperasian (12 halaman), Panduan Operator (9 halaman), Panduan Operator (6 halaman)

Adjusting the cutting height :

5. Putting into Storage

Storage :

Cleaning the mower :

The cutting height can be set to any

position between 12 mm and 42 mm.

1. Stand behind the cylinder mower

with one foot on the roller

2. Release the two locking screws

and adjust to the correct height in

the inspection window

3. Tighten the two locking screws

height.

The locking screws

both sides.

The mower may only be adjusted to a depth in which the lower

blade does not touch the ground when it is uneven.

v Clean cylinder mower before storage (see 5. Maintenance) and

store in a dry place.

The cylinder mower can be collapsed to save space by relea-

sing the wing nuts on the upright.

DANGER ! Cutting mechanism can cause injuries !

V Wear suitable work gloves when undertaking

maintenance.

Always keep the cylinder mower clean and remove grass deposits.

Deposits affect the cutting result as well as discharge of grass

clippings. Residual dirt and grass is easily removed immediately

after mowing.

1. Remove grass deposits with a brush and a cloth.

2. Oil the red cutting mechanism lightly with thin oil (e.g.

sprayed oil).

DANGER ! Cutting tool can cause injuries !

V Wear suitable work gloves when rectifying faults.

on both sides to the same

must always be set to the same height on