Gardena T 1030 card Panduan Petunjuk Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Rumput dan Taman Gardena T 1030 card. Gardena T 1030 card 18 halaman. Water timer
Halaman Cetak
Watering manually :
8
Bad-weather function :
10
On especially dry days the programmed watering cycle is
sometimes insufficient. You can then turn on your water
timer manually.
The program you have set remains unchanged.
1. Insert programming card
2. Keep red button pressed for 3 seconds.
The valve opens for 30 minutes regardless of the program set.
On rainy days the programmed watering cycle is often un-
necessary. You can therefore stop the programmed watering
cycle (bad-weather function). The program set is retained on
the programming card in this case.
Manual watering remains possible.
1. Push watering cycle slide
2. Transfer program (see Programming the Water Timer) .
To reactivate the program set previously, the watering cycle set
previously has to be set again and the program has to be transfer-
red (see Programming the Water Timer) .
8
in the card slot of the Water Timer.
to prog off.