KitchenAid KHMS1850SBL0 Panduan Petunjuk Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Oven Microwave KitchenAid KHMS1850SBL0. KitchenAid KHMS1850SBL0 13 halaman. Microwave hood combination
Juga untuk KitchenAid KHMS1850SBL0: Daftar Bagian (7 halaman)

KitchenAid KHMS1850SBL0 Panduan Petunjuk Instalasi
Recommended
Vent Length
A 31/4"x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent
should be used.
The total length of the vent system including straight vent,
elbow(s), transitions and wall or roof caps must not exceed the
equivalent of 140 ft (42.7 m) for either type of vent. See
"Recommended
Standard Fittings" section for equivalent lengths.
For best performance, use no more than three 90 ° elbows.
To calculate the length of the system you need, add the equivalent
lengths of each vent piece used in the system. See the following
examples:
31/4 '' x 10" (8.3 x 25.4 cm) vent system = 73 ft (22.2 m) total
C
A. One 3V4" x 10" (8.3 x 25.4 cm) 90 ° elbow = 25 ft (7.6 m)
B. 1 wall cap = 40 ft (12.2 rn)
C. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 rn)
6" (15.2 cm) vent system = 73ft (22.2 m) total
14
e ft (1=8m)
2 ft
C
D
A. Two 90 ° elbows = 20 ft (6.1 rn)
B. 1 wall cap = 40 ft (!2.2 rn)
B
C. 1 rectangular to round transition piece = 5 ft (1.5 m)
D. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m)
If the existing vent is round, a rectangular to round transition piece
must be used. In addition, a rectangular 3" (7.6 cm) extension vent
between the damper assembly and rectangular to round transition
piece must be installed to keep the damper from sticking.
ASSISTANCE
Call your authorized dealer or service center. When you call, you
will need the microwave oven model number and serial number.
Both numbers can be found on the model and serial number
plate, which is located behind the microwave oven door on the
front frame of the microwave oven.
If you need additional assistance, call us at our toll free number or
visit our website listed in the Use and Care Guide.
If any of the installation hardware needs to be replaced, call us at
our toll free number listed in the Use and Care Guide, and
reference the appropriate
part number listed here.
Damper Assembly
Part Number 8206442
Mounting Plate
Part Number 8206315
Upper Cabinet Template
Part Number 8205924
Mounting Screw Kit (includes
parts A-F in "Parts Supplied" in
the "Tools and Parts" section)
Part Number W10110238
Filler Panel Kits are available from your dealer to use when
installing this microwave oven in a 36" (91.4 cm) or 42" (106.7 cm)
wide opening. The filler panels come in pairs. Each panel is
3" (7.6 cm) wide.
clio
m
Filler Panel Kit Number
8171336
White
8171337
Black
8171338
Biscuit
8171339
Stainless Steel
99403
Almond
See your authorized dealer or service center for details.
461965621131
W 10117796
12/06
© 2006 AII rights reserved.
®Registered
Trademark/TM
Trademark
of KitchenAid,
U.S.A.
Printed in China