Gardena C 1030 plus Panduan Petunjuk Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem irigasi Gardena C 1030 plus. Gardena C 1030 plus 15 halaman. Water computer
Juga untuk Gardena C 1030 plus: Panduan Petunjuk Pengoperasian (15 halaman)
Halaman Cetak
Fit anti-theft device
(optional) :
K
L
5. Programming
Set current time
and day of week :
[Level 2]
1.
2.
3.
4.
Watering modes :
6
To secure your Water Computer against theft, you can obtain the
GARDENA Anti-theft device Art. No. 1815-00.791.00 from
GARDENA Service.
K
1. Screw clamp
with screw
Computer.
K
2. Use clamp
e.g. for fixing a chain.
It is no longer possible to remove the screw after it has been
screwed in.
To set the programme, the controller can be removed and
mobile programming can be carried out (see 4. Putting Your
Water Computer into Operation "Inserting battery" ).
Programming can be discontinued at any time by pressing the
Man. button. All programme data changed up to this time and
confirmed with the OK button is saved.
1. Press Menu-key (not necessary if the battery has just been
inserted).
Time and the hours display flash.
2. Set the time in hours with the ▼-▲ button
9
(example:
hours) and confirm with the OK-key.
Time and the minutes display flash.
3. Set the time in minutes with the ▼-▲ button
30
(example:
minutes) and confirm with the OK-key.
Time and the day of the week display flash.
4. Set the day of the week with the ▼-▲ button
(example: Sa Saturday) and confirm with the OK-key.
The display moves to the message
Insert watering programme.
Start Prog and the hour display will flash on the screen.
The water computer has 2 watering modes :
• Scheduled watering using the input programmes (watering
starts depending on the watering start time)
– or –
• Soil moisture sensor-controlled watering using a GARDENA
soil moisture sensor (watering begins when the soil moisture
sensor registers dry).
L
firmly to the back of the Water