Makita 6012HDW Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Bor Makita 6012HDW. Makita 6012HDW 17 halaman.

Speed changeover

.To

change the speed, turn the speed

change knob 180" while the drill is run-

ning. Be sure that the speed change knob

i s turned to the correct speed setting

before you begin operation. See arrow

indication. Use the right speed for the

job.

Fastening torque adjustment

Just turn the fastening torque adjust

knob on the tool in order to select any of

5 different fastening torques. Make sure

that the arrow points to the right torque

before you begin the job. Torques are

numbered from 1 to 5 in the order of

strength. Set to 5 for use as

drill. The

torque setting for number 5 is designed

for drilling, and to protect the motor

from burn out,

so it

can slip when

very

high torque is applied.

Fastening torque

adjust knob

Arrow

Grip

.The grip shown on the right is recom-

mended. However, grip the tool firmly

with both hands when drilling a large-

diameter hole.