Makita 6013BR Buku Petunjuk - Halaman 2
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Bor Makita 6013BR. Makita 6013BR 8 halaman. Makita 6013br drill:
Juga untuk Makita 6013BR: Buku Petunjuk (8 halaman), Daftar Bagian (6 halaman), Buku Petunjuk (20 halaman)
Halaman Cetak
ENGLISH
SPECIFICATIONS
Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Model
Steel
Wood
-1
)
Overall length
Net weight
Safety class
equipment
and
environmentally
compatible
) : 86 dB(A)
pA
) : 97 dB(A)
WA
6013B
13 mm
36 mm
340 mm
2.9 kg
END201-5
Vibration
The
vibration
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For European countries only
EC Declaration of Conformity
We
Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Drill
its
Model No./ Type: 6013B,6013BR
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
ENE032-1
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
ENF002-1
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
ENG102-3
000230
2
550
/II
total
value
(tri-axial
) : 2.5 m/s
h,D
2
Corporation
as
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
6013BR
13 mm
36 mm
550
340 mm
2.9 kg
ENG202-3
vector
sum)
2
or less
ENH101-13
the
responsible