Gardena 14772 Panduan Operator - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Operator untuk Alat Listrik Gardena 14772. Gardena 14772 13 halaman. Battery pruning lopper/battery telescopic pruning lopper

Halaman Cetak

c) When battery pack is not in use, keep it away from other metal

objects, like paper clips, coins, keys, nails, screws or other small metal

objects, that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, flush with water.

If liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

e) Do not use a battery pack or tool that is damaged or modified.

Damaged or modified batteries may exhibit unpredictable behaviour resulting in

fire, explosion or risk of injury.

f) Do not expose a battery pack or tool to fire or excessive temperature.

Exposure to fire or temperature above 130 °C may cause explosion.

g) Follow all charging instructions and do not charge the battery pack

or tool outside the temperature range specified in the instructions.

Charging improperly or at temperatures outside the specified range may damage

the battery and increase the risk of fire.

6) Service

a) Have your machine serviced by a qualified repair person using only

identical replacement parts.

This will ensure that the safety of the machine is maintained.

b) Never service damaged battery packs. Service of battery packs should

only be performed by the manufacturer or authorised service providers.

National regulation can restrict the use of the lopper.

Daily inspect before use and after dropping or other impacts in order to identify

any significant damage or defects.

1.2.2 Lopper safety warnings:

a) Keep all parts of the body away from the blade. Do not remove cut

material or hold material to be cut when blade is moving. Blades con-

tinue to move after the switch is turned off. A moment of inattention while

operating the lopper may result in serious personal injury.

b) Carry the lopper by the handle with the blade stopped and taking care

not to operate any power switch. Proper carrying of the lopper will decrease

the risk of inadvertent starting and resultant personal injury from the blades.

c) When transporting or storing the lopper, always fit the blade cover.

Proper handling of the lopper will decrease the risk of personal injury from the

blades.

d) When clearing jammed material or servicing the unit, make sure all

power switches are off and the battery pack is removed or disconnected.

Unexpected actuation of the lopper while clearing jammed material or servicing

may result in serious personal injury.

e) When clearing jammed material or servicing the unit, make sure all

power switches are off and the lock-off is in the locked position.

Unexpected actuation of the lopper while clearing jammed material or servicing

may result in serious personal injury.

f) Hold the lopper by insulated gripping surfaces only, because the blade

may contact hidden wiring.

Blades contacting a "live" wire may make exposed metal parts of the lopper "live"

and could give the operator an electric shock.

g) Keep all power cords and cables away from cutting area.

Power cords or cables may be hidden in hedges or bushes and can be

accidentally cut by the blade.

h) Do not use the lopper in bad weather conditions, especially when

there is a risk of lightning. This decreases the risk of being struck by lightning.

1.2.3 Extended-reach lopper safety warnings:

a) To reduce the risk of electrocution, never use the extended-reach lop-

per near any electrical power lines. Contact with or use near power lines may

cause serious injury or electric shock resulting in death.

b) Always use two hands when operating the extended-reach lopper.

Hold the extended-reach lopper with both hands to avoid loss of control.

c) Always use head protection when operating the extended-reach

lopper overhead. Falling debris can result in serious personal injury.

v Search hedges and bushes for hidden objects (e.g. wire fences and hidden

wires).

v Use a residual current device (RCD) with a trip current of 30 mA or less.

v Hold the lopper with both hands on both handles.

v When in use, stand on the floor and not on a ladder or other unstable surface.

v Before using the lopper, make sure that the locking devices of all moving

parts (e.g. the extended shaft and the pivot element) are in the locked position.

1.3 Additional safety warnings

1.3.1 Intended use:

The GARDENA Lopper is intended for delimbing trees, hedges, shrub and

bushes with limbs of up to 28 mm in diameter in private domestic gardens or

allotments.

The product is not intended for long term use (professional use).

DANGER!

Risk of physical injury!

v Cut branches into parts to ensure that you cannot be struck by falling

branches or that fallen branches can bounce up from the soil.

v Do not stand under the branch while cutting.

v Do not use for pond care.

1.3.2 Safety warnings for batteries and chargers

Read all the safety and general instructions.

Failure to observe the safety and general instructions may result

in electric shock, fire and / or serious injury.

v Store these instructions in a safe place. Only use the charger if you can

fully evaluate all functions and carry them out without restrictions, or if you have

received corresponding instructions.

v Supervise children during use, cleaning and maintenance.

This will ensure that children do not play with the charger.

v Charge only lithium-ion batteries of the POWER FOR ALL system type

PBA 18V with a capacity of 1.5 Ah or more (5 battery cells or more). The

battery voltage must match the battery charging voltage of the charger.

Do not charge any non rechargeable batteries.

Otherwise there is a risk of fire and explosion.

Do not expose the charger to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

v Keep the charger clean. Dirt poses a risk of electric shock.

v Always check the charger, cable and plug before use. Stop using the

charger if you discover any damage. Do not open the charger yourself,

and have it repaired only by a qualified specialist using only original

replacement parts.

Damaged chargers, cables and plugs increase the risk of electric shock.

v Do not operate the charger on an easily ignited surface (e. g. paper,

textiles, etc.) or in a flammable environment.

There is a risk of fire due to the charger heating up during operation.

v In order to avoid safety hazards, if the power supply cord needs to be

replaced, this must be done by GARDENA or by a customer service centre

that is authorised to repair GARDENA power tools.

v Do not operate the product while it is charging.

Products sold in GB only: Your product is fitted with an BS 1363/A approved

electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not

suitable for your socket outlets, it should be cut off and an appropriate plug fitted

in its place by an authorised customer service agent. The replacement plug

should have the same fuse rating as the original plug. The severed plug must be

disposed of to avoid a possible shock hazard and should never be inserted into

a mains socket elsewhere.

v These safety warnings apply only for 18V Li-ion rechargeable batteries

for the POWER FOR ALL system.

v Use the rechargeable battery only with products from POWER FOR

ALL System partners. 18V rechargeable batteries labelled with POWER FOR

ALL are fully compatible with the following products: All 18 V products from

POWER FOR ALL System partners.

v Observe the battery recommendations in the operating manual of

your product.

Only this way can the rechargeable battery and the product be operated without

danger and the rechargeable batteries protected from hazardous overloading.

v Only charge the batteries using chargers recommended by the

manufacturer or by POWER FOR ALL system partners. A charger that is

suitable for one type of battery pack may pose a fire risk when used with

different batteries (Battery type: PBA 18V... / compatible chargers: AL 18...).

v The battery is supplied partially charged.

To ensure full battery capacity, fully charge the battery in the charger before using

your power tool for the first time.

v Keep battery packs out of the reach of children.

v Do not open the battery. There is a risk of short-circuiting.

v In case of damage and improper use of the battery, vapours may be

emitted. The battery can set alight or explode.

Ensure the area is well ventilated and seek medical attention should you experi-

ence any adverse effects. The vapours may irritate the respiratory system.

v If used incorrectly or if the battery is damaged, flammable liquid may

be ejected from the battery. Contact with this liquid should be avoided. If

contact accidentally occurs, rinse off with water. If the liquid comes into

contact with your eyes, seek additional medical attention.

Liquid ejected from the battery may cause irritation or burns.

v If the battery is damaged liquid can be ejected and cover nearby sur-

faces. Check affected parts. Clean these parts or change them if necessary.

v Do not short-circuit the battery pack. When the battery pack is not in

use, keep it away from other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can make a connection

from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

v The battery contacts can be hot after use. Be careful of the hot

contacts when remove the battery.

v The battery can be damaged by pointed objects such as nails or

screwdrivers or by force applied externally. An internal short circuit may

occur, causing the battery to burn, smoke, explode or overheat.

v Never service damaged battery packs. Service of battery packs should

only be performed by the manufacturer or authorised service providers.

Protect the battery against heat, e. g. against continuous intense

sunlight, fire, dirt, water and moisture.

There is a risk of explosion and short-circuiting.

v Only operate and store the battery at an ambient temperature

between – 20 °C and + 50 °C.

Do not leave the battery in your car in the summer, for example.

At temperatures of < 0 °C some devices may experience a loss of power.

v Only charge the battery at an ambient temperature which is between

0 °C and + 35 °C. Only charge the rechargeable battery with a USB cable

at an ambient temperature which is between + 10 °C and + 35 °C.