Makita 601DST Buku Petunjuk - Halaman 11
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Bor Makita 601DST. Makita 601DST 15 halaman. 10 mm (3/8") battery-powered driver dril
Halaman Cetak
Screwdriving operation
Place
the
point
of the
driver
bit in the
screw
head and
apply pressure to the tool. Start
the tool slowly and then increase the speed gradually. Release the switch trigger just
as
the screw bottoms out. The electric brake will then stop the tool immediately, preventing
the
screw and/or
bit
from being damaged.
When driving wood screws, predrill pilot
holes to make driving easier and to prevent
3 5 19/64")
splitting of the workpiece. See the chart.
NOTE :
Make sure that the driver bit is inserted straight in the screw head,
or
the screw and/or bit
may be damaged.
Lauan wood
ADDlication
Drilling and driving performance
The following reference table indicates the approximate drilling and driving capacities from
a
single charge.
9
mm 15/16")
3 0 m m
( 1
-311 6")
Approx.
220
Dimensions of wood screw
I
Workpiece
Fasteninqs
Application
I
Diameter of hole
I
Sheet
/
Board
I
No. holes
3 mm 11/8")
1.6 m m (1/16")
Cold-rolled steel
sheet or plate
Aluminum sheet
2
mm 15/64")
I
3.5 mm x
20
m m (118''
x
314")
Wood screws
Lauan wood
Approx.
900
screws
11