Makita 6093DW Buku Petunjuk - Halaman 8
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Bor Makita 6093DW. Makita 6093DW 16 halaman. Equipped with electric brake 10 mm (3/8") with fast charger
Juga untuk Makita 6093DW: Buku Petunjuk (17 halaman)
Halaman Cetak
Switch action
Tool
speed is increased by increasing pres-
sure on the trigger. To start the tool,
simply pull the trigger. Release the trigger
to stop.
Trigger
switch
CAUTION
:
Before
inserting
the battery
cartridge
into the tool,
always
check to see that the trigger
switch actuates
properly
and returns
to the "OFF"
position
when released.
Reversing switch action
This tool has a reversing switch to change
the direction of rotation. Slide the revers-
ing switch to the right for clockwise rota-
tion or to the left for counterclockwise.
Reversing switch
CAUTION
:
• Always
check
the direction
of rotation
before
operation.
• Use the
reversing
switch
only
when
the tool
comes
to a complete
stop. Changing
the
direction
of rotation
before
the tool
stops may ruin the tool.
Speed change
To change the tool speed, turn the speed
change knob so that the arrow of the de-
sired speed on the knob is aligned with the
refel'ence arrow on the tool body. If the
speed change knob does not turn easily,
switch on the tool and turn the knob again
while the tool is running under no load.
I 0-
400 R/min.
Speed change knob
|
]
Arrow
0
1,100
R/rain.