Makita 6095D Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Bor Makita 6095D. Makita 6095D 15 halaman. Cordless driver drill
Juga untuk Makita 6095D: Buku Petunjuk (14 halaman), Daftar Bagian (3 halaman)

Halaman Cetak

14.

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking t o

see that keys and adjusting wrenches are removed from tool before turning

it on.

15.

AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger

on switch. Be sure switch is OFF when plugging in.

16.

OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only

extension cords intended for use outdoors and so marked.

17.

STAY ALERT. Watch what you are doing, use common sense. Don't operate

tool when you are tired.

18.

CHECK DAMAGED PARTS. Before further use of the tool, a guard or other

part that is damaged should be carefully checked t o determine that

will

operate properly and perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts, mounting, and

any other conditions that may affect its operation. A guard or other part

that is damaged should be properly repaired or replaced by an authorized

service center unless otherwise indicated elsewhere in this instruction

manual. Have defective switches replaced

authorized service center. Don't

use tool if switch does not turn it on and off.

19. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact w i t h grounded

surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.

20.

REPLACEMENT PARTS. When servicing, use only identical replacement parts.

VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,

outlet, etc.) be sure the voltage supplied is the same as that specified on the

nameplate of the tool. A power source with voltage greater than that specified

for the tool can result in SERIOUS INJURY t o the user

as well as damage t o

the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with

voltage less than the nameplate rating is harmful t o the motor.