Makita 6203DWA Informasi Teknis - Halaman 3

Jelajahi secara online atau unduh pdf Informasi Teknis untuk Bor Makita 6203DWA. Makita 6203DWA 5 halaman.

epair

(1)

Disassembly

Remove drill chuck before replacing gear assembly. Drill chuck should not be removed when disassembling th housing

only. Take care that compression spring in the speed change lever would fly out.

(2)

Handling of auxiliary gear assembly

Dispose machine screw that fixes the motor bracket as this is used for temporary fitting at the time of transportation.

Temporary machine screw

(3)

Mounting of motor bracket

Mount motor bracket to the motor and install gear assembly to the motor bracket. (See figure 3. Tightening torque of

M3 screw that fixes gear assembly and motor bracket: 6 kgf/cm

(Do not tighten the screw over the specified torque, or the washer will be damaged.)

Motor bracket

DC motor

Compression spring

Figure 1

Figure 2

Figure 3

Speed change lever

Motor bracket

Gear assembly

M3 screw

Motor bracket

DC motor