Lexmark MS812dn Manual Pencetakan - Halaman 15

Jelajahi secara online atau unduh pdf Manual Pencetakan untuk Printer Lexmark MS812dn. Lexmark MS812dn 18 halaman. Ms811/ms812 series monochrome laser printer
Juga untuk Lexmark MS812dn: Catatan Teknis (3 halaman), Manual Informasi (1 halaman), Manual (20 halaman), Memindahkan Manual (3 halaman), Manual Kertas (4 halaman), Menu Map (3 halaman), Manual Perlengkapan (3 halaman), Lembar Pengaturan (2 halaman), Manual Cacat Cetak (1 halaman), Manual (17 halaman), Lembar data (2 halaman)

Halaman Cetak
Lexmark MS812dn Manual Pencetakan
4
Prepare the paper or specialty media for loading.
•
Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
•
Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
•
Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.
5
Load paper or specialty media.
Note: Slide the stack gently into the multipurpose feeder until it comes to a stop.
•
Load only one size and type of paper or specialty media at a time.
•
Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
•
There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Printing Guide
Page 15 of 18