Makita 6216DWBE Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Bor Makita 6216DWBE. Makita 6216DWBE 20 halaman.

OPERATION

Switch action

CAUTION:

Before inserting the battery cartridge into the tool, always check to see that the switch

trigger actuates properly and returns to the "OFF" position when released.

To start the tool, simply pull the trigger.

Tool speed is increased by increasing pres-

sure on the trigger. Release the trigger to

stop.

Reversing switch action

CAUTION:

*Always check the direction of rc ation b fc

iperation.

.Use the reversing switch only after the tool comes to a complete stop. Changing the

*When not operating the tool, always set the reversing switch lever to the neutral position.

direction of rotation before the taol stops may damage the tool.

This tool has a reversing switch to change

the direction of rotation. Depress the

reversing switch lever from the

side for

clockwise rotation or from the B side for

counterclockwise rotation. When the switch

lever is in the neutral position, the switch

trigger cannot be pulled.

Speed change

change the speed, first switch off the

tool and then slide the speed change lever

to the "11" side for high speed or "I" side

for low speed. Be sure that the speed

change lever is set to the correct position

before operation. Use the right speed for

your

job.

Reversing switch lever

Clockwise

Counterclockwise

Low speed

High speed

Soeed chanae lever