Gardena 9335-20 Panduan Operator - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Operator untuk Blower Gardena 9335-20. Gardena 9335-20 10 halaman. Accu blower
Juga untuk Gardena 9335-20: Panduan Petunjuk Pengoperasian (16 halaman), Panduan Petunjuk Pengoperasian (18 halaman), Panduan Petunjuk Pengoperasian (17 halaman), Panduan Petunjuk Pengoperasian (17 halaman)
Halaman Cetak
c) Never blow debris in the direction of bystanders.
The operator or user is responsible for accidents or hazards occurring
to other people or their property.
d) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
e) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the charger
plug in any way. Do not use any adaptor plugs with earthed (grounded)
power tools. Use only on AC mains supply voltage shown on the prod-
uct rating label.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk electric shock.
d) Do not abuse the charger or charger cord. Never use the charger
cord for carrying, pulling or unplugging the charger. Keep charger
and charger cord away from heat, oil, sharp edges or moving parts.
Before use, examine for damage. Replace charger and/or charger
cord if there are signs of damage or aging. Do not use the product if
the charger or charger cord is damaged or worn. Immediately discon-
nect from the mains electricity supply if the cord is cut, or the insula-
tion is damaged. Do not touch the electric cord until the electrical
supply has been disconnected. Do not repair a cut or damaged cord.
Replace it with a new one.
Damaged or entangled cords increase the risk of electric shock.
e) The electric cord must be uncoiled. Coiled cord can overheat and reduce
the efficiency of the product. Always wind cord carefully, avoiding kinks.
f) Only use the charger provided with your unit when charging the
battery. Use of any other charger could permanently damage the battery,
charger and / or the blower unit.
g) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply with a tripping cur-
rent of not more than 30 mA. Even with a RCD installed, 100 % safety
cannot be guaranteed and safe working practices must be followed
at all times. Check your RCD every time you use your product.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection and
hearing protection. To prevent dust irritation, the use of a dust mask
is recommended. Protective equipment such as eye protection, hearing
protection, dust mask, nonskid safety shoes, or hard hat used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Battery-powered units do not have
to be plugged into an electrical outlet to operate; therefore, they are
always in operating mode. Ensure the switch is in the off position
before connecting to battery charger, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools
that have the switch on invites accidents.
d) Do not overreach. Keep proper footing and balance at all times.
On slopes, be extra careful and wear non-slip footwear. Do not walk
backwards while operating your product. Walk, never run. Do not
use ladders while operating the product.
This enables better control of the power tool in unexpected situations.
e) Dress properly. Always wear suitable clothing, gloves, and stout
shoes. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
4) Power tool use and care
a) Only use the product in the manner and for the functions described in
these instructions. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Always make sure your product is in a safe operating condition
before use. Do not use the power tool if the switch does not turn it
on and off. Know how to stop the product quickly in an emergency.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c) The impeller continues to rotate after your product has been switched
off. The motor must be stopped and the impeller blade no longer turning to
avoid serious injury from the rotating blades.
d) Remove battery from unit:
– before leaving the product unattended for any period;
– before clearing a blockage;
– before checking, cleaning or working on the appliance;
– if the product starts to vibrate abnormally. Check immediately.
Excessive vibration can cause injury.
– before passing to another person.
e) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of untrained users.
f) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired
before use. Keep all cooling air inlets clear of debris.
Many accidents are caused by poorly maintained power tools.
g) Use the power tool and accessories in accordance with these instruc-
tions, taking into account the working conditions and the work to
be performed. Use the product only in daylight or good artificial light.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger provided with your unit and specified
by the manufacturer. A charger that is suitable for one type of battery may
create a risk of fire when used with another battery.
b) Use power tools only with specifically designated batteries.
Use of any other batteries may create a risk of injury and fire.
c) When battery is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal
objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
6) Maintenance and storage
Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is maintained.
– Keep all nuts, bolts and screws tight to be sure the product is in a safe
working condition.
– Replace worn or damaged parts for safety.
– Use only genuine replacement parts and accessories.
– Store in a cool dry place and out of reach of children. Do not store outdoors.
The unit must not be stored over 35 °C or under direct exposure to sunlight.
Do not store the unit in places with static electricity.
Blower safety warnings
• Inspect the area before using the unit.
Remove all debris and hard objects such as rocks, glass, wire, etc., that can
ricochet, be thrown, or otherwise cause injury or damage during operation.
• Never run the unit without the proper equipment attached.
When used as a blower, always install a blower tube. Use only recommended
attachments to prevent personal injury.
• Do not use blower near leaf or brush fires, fireplaces, barbecue pits,
ashtrays, etc. Proper use of the blower will help avoid spreading fire.
• Never place objects inside the blower tubes; always direct the blowing
debris away from people, animals, glass, and solid objects such as
trees, automobiles, walls, etc.
The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet
which can hurt people or animals, break glass, or cause other damage.
• Never use for spreading chemicals, fertil izers, or any other
substances. This will prevent the spreading of toxic materials.
Battery safety
DANGER! Fire risk!
The battery to be charged must be placed on a nonflammable, heat
resistant and non-conductive surface while charging.
The supply terminals are not to be short-circuited.
Keep corrosive, flammable and easily combustible objects clear of
the battery charger and the battery.
Do not cover the battery charger and the battery while charging.
Disconnect the battery charger immediately in the event of smoke formation
or fire.
Only use the original GARDENA Charger to charge the battery. The use of other
battery chargers may damage the batteries irreparably and even cause a fire.
Only use original GARDENA batteries for the GARDENA battery product.
Do not charge any third-party batteries. There is a risk of fire and explosion!
If you notice fire: Extinguish the flames with oxygen reducing materials.
DANGER! Risk of explosion!
Protect batteries from heat and fire. Do not leave on radiators or expose
to strong sunshine for long periods.
Do not operate in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Batteries may create sparks which
could ignite the dust or fumes.
Check your replacement battery before each use. Visually check the battery
before each use. A non-functioning battery must be disposed of correctly. Do not
send by post. For further details, please contact your local disposal companies.
9