Makita 6300D Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Bor Makita 6300D. Makita 6300D 15 halaman. 13 mm (1/2") equipped with electric brake

Halaman Cetak
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF)
or ABOVE 4OoC (104OF).
2. Do not attempt t o use a step-up transformer, an engine generator or DC power
3.
Do
not allow anything t o cover or clog the charger vents.
4. Do not short the battery cartridge:
receptacle.
(11 Do
n o t touch the terminals w i t h any conductive material.
(2)
Avoid storing battery cartridge in a container with other metal objects such
(3)
Do
not expose battery cartridge t o water or rain.
as nails, coins, etc.
A battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
5. Do
not store the tool and Battery Cartridge in locations where the tempera-
6. Do
not incinerate the Battery Cartridge even if it is severely damaged or is
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY RULES
1. Be aware that this tool is always in an operating condition, because
it does
2. Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5. When drilling into walls, floors or wherever "live" electrical wires may be
encountered,
DO NOT
TOUCH ANY METAL PARTS
OF
THE
TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drill into a "live"
wire.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
6.
Do
not leave the tool running. Operate the tool only when hand-held.
7. Do
not touch the drill bit or the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5