Makita 6302 Buku Petunjuk - Halaman 5
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Bor Makita 6302. Makita 6302 8 halaman. 13 mm (1/2”) variable speed/reversing
Juga untuk Makita 6302: Buku Petunjuk (8 halaman), Buku Petunjuk (8 halaman)
Halaman Cetak
Switch action
Tool speed is increased by increasing pres-
sure on the trigger. To start the tool, simply
pull the trigger. Release the trigger to stop.
For continuous operation, pull the trigger
and then push in the lock button. To stop
the tool from the locked position, pull the
trigger fully, then release it.
CAUTION
:
Before plugging in the tool, always check to
see
that the trigger switch actuates porperly
and returns to the "OFF" position when released.
Reversing switch action
This tool has a reversing switch to change
the direction of rotation. Move the revers-
ing switch lever to the "FWD" position for
clockwise rotation or the "REV" position
for counterclockwise.
Reversing switch lever
CAUTION
:
0
Always check the direction of rotation before drilling.
0
Use the reversing switch only when the tool comes to
a
complete stop. Changing the
direction of rotation before the
tool
stop may ruin the tool.
5