Fronius TransPocket 180 TIG/EF Prosedur Pembaruan - Halaman 7
Jelajahi secara online atau unduh pdf Prosedur Pembaruan untuk Sistem Pengelasan Fronius TransPocket 180 TIG/EF. Fronius TransPocket 180 TIG/EF 7 halaman.
Halaman Cetak
15) Press ok and close the Service Tool. Upload finished!
!! Perform a reboot (switch OFF & ON) at least twice after the update!!
1) With the following steps you can check the Software update direct on the power source.
After this steps you should see the uploaded version of the software on the display
09/2018
7/7