a&p instruments UX 3081WQ Panduan Petunjuk Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Ukur a&p instruments UX 3081WQ. a&p instruments UX 3081WQ 20 halaman. Moisture analysers

Halaman Cetak

Operating instructions for moisture analysers

UX 3081

UX 3081WQ

Moisture analysis process

The device should be connected to the mains supply and switched on with a drying tray. A weight value is

displayed.

Set scales to zero using the 'tare' button,

display '0.000 g'.

2. Swing the heater over the sample, switch on the

heater switch and the drying phase begins.

Header data is now printed for devices with a built-in

printer. The sample is dried until it has reached a

constant weight; the heater then switches off

automatically. The time and measurement value is

printed for devices with a printer.

If you do not wish to make any measurements,

please always ensure that the heater is swung back

to its rearmost position!

3. Measurement values are displayed for the entire length of timethe heater is positioned above the sample.

The device should not be moved from its position during measurement, as this causes measurement errors.

The external printer prints the following

at the start of the measurement:

Model, device ID,

date, time,

heater temperature,

timer or shut-off parameters, initial weight.

Please ensure drying trays have cooled down before using for measurement.

If the measurement ends before

it is complete,

the display shows:

For substances which are difficult to remove from the

tray after being dried, we recommend using foil trays,

which can be made quickly and economically from

aluminum foil using the ULTRA X foil press.

a&p instruments, Kluckhofer Weg 61, D-32657 Lemgo, Tel.:05232 97780, Fax.: 977820

E-Mail: [email protected], Internet: www.apinstruments.de

Evenly distribute approx. 50 - 200 g

sample matter in the tray and wait

for the readout to stop.

And after the device has finished measuring, once the

heater has been swung back to its rearmost position:

time

mode

value (weight)

unit

green

Measurement value,

measurement time,

substance,

initials

esc

mode

value (weight)

to sample weight.

glow if

red

heater is on

flashes if

measurement

ends

LED´s are off

if switch „off"

time

unit

Seite 13