A&S 800 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Pembicara A&S 800. A&S 800 16 halaman. Studio bar

Soundbar

Unwind the mains adapter and mains cable to their full length. Connect the mains adapter to the DC IN

23V socket of the soundbar, then connect the mains cable to the mains adapter and into a mains socket.

Subwoofer

Connect the mains cable to the AC~ Socket of the Subwoofer and then into a mains socket.

Pairing the Wireless Subwoofer with the Main Unit

The subwoofer and soundbar will automatically pair when both units are plugged into the mains sockets

and turned on. No cable is needed for connecting the two units.

•

When the subwoofer is pairing with the main unit, the Pair Indicator will flash fast.

•

When the subwoofer is paired with the main unit, the Pair Indicator will light up.

NOTE:

Do not press the Pair button on the rear of the subwoofer, except for manual pairing.

If the automatic pairing fails, pair the subwoofer with the main unit manually.

1. Ensure that all the cables are well connected and the main unit is in Standby mode.

2. Press and hold the Pair button on the rear of the subwoofer for a few seconds. The subwoofer will

enter the pairing mode and the Pair Indicator will blink quickly.

3. Press

the button on the main unit or on the remote control to switch the main unit on.

4. After the wireless connection succeeded, the Pair Indicator will light up.

5. If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the subwoofer and

then reconnect the main cable after 3 minutes. Repeat step 1 ~ 4.

NOTE:

•

If the wireless connection fails again, check if there is conflict or strong interference

(for example, interference from an electronic device) around your location. Remove these conflicts or

strong interferences and repeat the above procedures.

•

The subwoofer should be within 6m (18 feet) of the soundbar in an open area.

•

If a TV or an external device is connected, the main unit only AUX model and the subwoofer will

switch on automatically when the TV or the external device is switched on.

•

If the main unit is not connected with the subwoofer and it is in On mode, the POWER Indicator will

flash. Follow step 1 ~ 4 above to pair the subwoofer to the main unit.