A&S 800 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Pembicara A&S 800. A&S 800 16 halaman. Studio bar

Halaman Cetak

Remote Control

2 VOL+/VOL-

3 SOURCE

4 EQ

5 DIMMER

6 MUTE

/PAIR

9 HDMI

10 SURROUND

11 BASS

Prepare the Remote Control

The provided Remote Control allows the unit to

be operated from a distance.

Even if the Remote Control is operated within

•

the effective range 19.7 feet (6m), remote

control operation may be impossible if there

are any obstacles between the unit and the

remote control.

If the Remote Control is operated near other

•

products which generate infrared rays, or if

other remote control devices using infra-red

rays are used near the unit, it may operate

incorrectly. Conversely, the other products may

operate incorrectly.

First-time use:

The unit has a pre-

installed lithium

CR2025 battery.

Remove the

protective tab to

activate the remote control battery.

Replace the Remote Control Battery

The remote control requires a CR2025, 3V

Lithium battery.

1. Push the tab on the side of the battery tray

towards the tray.

2. Now slide the battery tray out of the remote control.

Switch the unit between ON and

STANDBY mode.

Increase/decrease the volume level.

Select the play function.

Select a preset sound effect.

Adjust display brightness.

Mute or resume the sound.

Skip to previous/next track in

Bluetooth/USB mode.

Play/pause/resume playback in

Bluetooth/USB mode.

Press and hold to activate the pairing

function in Bluetooth mode or

disconnect the existing paired

Bluetooth device.

Select the HDMI1/2/ARC mode.

Turn the surround ON/OFF.

Activate bass setup.

Preparations

3. Remove the old battery. Place a new CR2025

battery into the battery tray with the correct

polarity (+/-) as indicated.

4. Slide the battery tray back into the slot in the

remote control.

Precautions Concerning Batteries

When the Remote Control is not to be used for

•

a long time (more than a month), remove the

battery from the Remote Control to prevent it

from leaking.

If the batteries leak, wipe away the leakage

•

inside the battery compartment and replace

the batteries with new ones.

Do not use any batteries other than those

•

specified.

Do not heat or disassemble batteries.

•

Never throw them in fire or water.

Do not carry or store batteries with other

•

metallic objects. Doing so could cause

batteries to short circuit, leak or explode.

Never recharge a battery unless it is confirmed

•

to be a rechargeable type.