Align-Pilates A2 Manual Petunjuk Perakitan - Halaman 7
Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Peralatan Kebugaran Align-Pilates A2. Align-Pilates A2 16 halaman. Full cadillac
1. Installing the Full Cadillac
Installing the Full Cadillac is easy and can be done with the tools provided in the box.
We recommend getting a pair of stable trestles to put the reformer on to enable easy fitting of the legs.
Place the trestles 120cm apart and make sure the top of the trestles have something soft on them to
avoid scratching the reformer frame. Carefully lift the reformer and place it gently onto the trestles, so one
of the trestles is underneath the point where the foot bar attaches to the aluminium runner.
At the riser end of the reformer attach the Full Cadillac base feet to the leg extensions using the Allen key
and 4 bolts/washers provided, 2 bolts/washers per side, see Fig 1 & 2.
Fig.1
Fig.2
Remove the two black adjustable screw in feet by unscrewing them completely out and then screw these
completely into the bottom of the C1-Pro Full Cadillac base bracket. This should result in your reformer
looking as per Fig 3 & 4.
Fig.3
Fig.4
As per the arrows in Fig.3 and 4, there are four bolt positions to attach the Full Cadillac top bracket to the
leg extension. Initially attach the two bolts directly onto the runner first, use the Allen key provided to tighten
until hand tight, and then attach the bolts on the underside and front face of the runner. Once all bolts are
inserted, tighten fully. Do this for both sides of the reformer. Now all four brackets are attached securely to
the leg extensions, with assistance remove the reformer from the trestle and place in its' final desired
situation.
To attach the brackets to the foot end, insert the two long bolts through the bracket and leg then hand
tighten with the Allen Key, Fig.5. To attach the top bracket, use the three bolts and washers as indicated
below in Fig.6 to attach the bracket to the frame.
Fig.5
Fig.6
7