Garmin 010-00860-00 Panduan Instalasi - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk GPS Garmin 010-00860-00. Garmin 010-00860-00 44 halaman. Tso, transceivers/receivers

Garmin 010-00860-00 Panduan Instalasi

4.2.2 UAT Antenna Options

4.3 Miscellaneous Options

Connector, BNC, Male, Clamp
GPS 1.57542 GHz Notch Filter
Connector, TNC, Male, Clamp
[1] This part is not available from Garmin.
Vendor Contact Information (provided for convenience only):
Amphenol RF, Four Old Newtown Road, Danbury, CT 06810 Phone: 800-627-7100

4.4 Installation Materials not Supplied

4.4.1 Installation Materials Required but not Supplied

The GDL 88 is intended for use with the standard aviation accessories. The following items are required
for installation, but not supplied.
Wire (MIL-W-22759/16 or equivalent)
Shielded Wire (MIL-C-27500 or equivalent)
Mounting Screws (8 minimum – MS24693 Screw, Machine, Flat Countersunk Head 100°, Cross-
recessed with .1380-32 UNC-2A Thread, Corrosion Resistant Steel)
Push/Pull (manually resettable) Circuit Breakers
Tie Wraps or Lacing Cord
Ring Terminals (for grounding)
Coaxial Cable (RG-400, RG-142B or equivalent – Refer to Section 4.11 for additional
information).

4.5 Special Tools Required

Some of the connectors use crimp contacts. The table below identifies crimp tools required to ensure
consistent, reliable crimp contact connections for the rear D-sub connectors.
Manufacturer
Military P/N
Positronic
ITT Cannon
AMP
Daniels
Astro
Insertion/extraction tools from ITT Cannon are all plastic; others are plastic with metal tip.
GDL 88 TSO Installation Manual
190-01122-00
Item

Table 4-3. Recommended Crimp Tools (or Equivalent)

Hand Crimping
Tool
M22520/2-01
9507-0-0-0
995-0001-584
601966-1
AFM8
615717
Garmin P/N
330-00087-00
330-00067-00
N/A
22 – 28 AWG (P1001 – P1005)
Positioner
M22520/2-09
9502-4-0-0
995-0001-739
601966-6
K42
615725
NOTE
Mfg P/N
N/A
N/A
031-4452 [1]
Insertion/
Extraction Tool
M81969/14-01
M81969/1-04
M81969/1-04
000849490
274-7048-000MIL
91067-1
2031838-1
M81969/14-01
M81969/1-04
M81969/14-01
M81969/1-04
Page 4-3
Rev. A