AEG 24" BS7304001M Panduan Pengguna - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Oven AEG 24" BS7304001M. AEG 24" BS7304001M 30 halaman. 24” built-in oven

AEG 24
4. Hold the door glass panels on their top
edge one by one and pull them up out of
the guide
5. Clean the door glass panels.
To install panels follow the procedure in re-
verse. Install the smaller panel first, then the
larger.

WHAT TO DO IF...

WARNING!
Refer to "Safety information" chapter.
Problem
The appliance does not heat up The appliance is deactivated
The appliance does not heat up The time of day is not set
The appliance does not heat up The necessary settings are not
The appliance does not heat up The automatic switch-off is ac-
The appliance does not heat up The fuse is released
The oven lamp does not operate The oven lamp is defective
The display shows F102
The display shows an error
code that is not in this list
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
Possible cause
set
tivated
The door lock is defect
There is an electronic error
What to do if...
Solution
Activate the appliance
Set the clock. Refer to "First set-
ting the time of day"
Make sure, the settings are cor-
rect
Refer to „Automatic switch-
off"
Make sure, if the fuse is the
cause for the malfunction. If
the fuse releases again and
again, refer to an authorized
electrician
Replace the oven lamp.
• Close the door correctly
• Deactivate the appliance
with the house fuse or the
safety switch in the fuse
box and activate it again
• If the display shows F102
again, refer to the Service
Center
• Deactivate the appliance
with the house fuse or the
safety switch in the fuse
box and activate it again
• If the display shows the er-
ror code again, refer to the
Service Center
27